Search results for query: *

I have recently purchased a DL370 G6 with the optional second SFF drive cage and optional P410/256 array controller. Would like to know if it is possible to create an array that would use drives from both controllers? If so, how? Thanks. Jim W MCSE CCNA Director of Network Services

Not sure if there is a way via the ASA I'm sure someone else will chime in if there is. Are you using Active Directory? If so, it might be easier just set logon hours for this particular user and you could take it one step further and restrict their login to just their workstation. Jim W MCSE...

It is because your VPNPOOL IP range is the same and your local lan range. They should be different. Jim W MCSE CCNA Director of Network Services

You can also try access-based enumeration. http://www.microsoft.com/downloads/details.aspx?FamilyID=04A563D9-78D9-4342-A485-B030AC442084&displaylang=en Although I am not sure if it works on W2K server. Jim W MCSE CCNA Director of Network Services

Supergrrover..thank for the reply. An MX record is not needed. Jim W MCSE CCNA Director of Network Services

Yes I have my own e-mail server setup before the DLP solution was in place and do have a PTR record created. However, the source IP of the email once it is inspected and forwarded by the DLP solution is that of our PAT IP address and not that of our mail server. Thanks for the reply. Jim W...

There is a chance of being black listed but I am more concerned with our customers, business partners, etc not receiving emails that they are expecting. One of the biggest ISP that our customers use is Comcast. I know for a fact that Comcast will reject emails for last of a reverse record...

Here is the situation. Recently implemented a data loss prevention solution (DLP). The solution will examine SMTP transmissions. In order for the solution to examine SMTP traffic I need to forward all SMTP to the DLP appliance. The DLP appliance inspects the traffic and if it passes the...

Yes...just looking for the 'cons'. Thanks. Jim W MCSE CCNA Director of Network Services

Got a question on something I have never given any thought to before but the need may arise to implement this. Currently using PAT for our company access to the internet. Currently the public IP address used for PAT does not have a DNS entry. I cannot think of any reason that would cause any...

Can you post a copy of your config masking out and public IP's? Jim W MCSE CCNA Network Manager

When your users are getting these messages how are they trying to open the XLS documents? Are they trying by selecting File and then choosing from the list of most recent files opened? Are the navigation via explorer to the mapped drive and double-clicking on the file? The reason I asked the...

I don't believe you need the following access-lists: access-list outside_access_in remark VPN - GRE access-list outside_access_in permit gre any any log access-list outside_access_in remark VPN - PPTP (port 1723) access-list outside_access_in permit tcp any range pptp pptp any range pptp pptp...

Sanjay...I was hoping someone else would jump in who has a bit more experience with the PIX than I do. I'll have another look and see if I spot anything. Jim W MCSE CCNA Network Manager

Try the following: access-list nonat permit ip host 192.168.1.0 192.168.2.0 255.255.255.0 nat (inside) 0 access-list nonat Jim W MCSE CCNA Network Manager

Add the following: fixup protocol pptp 1723 Jim W MCSE CCNA Network Manager

Your VPN pool of addresses cannot be the same as your internal network addresses. ip address inside 192.168.1.1 255.255.255.0 ip local pool VPN 192.168.1.2-192.168.1.9 Just change it to something else. Jim W MCSE CCNA Network Manager

You will have to seize the role(s) that were being held on the dead DC. Take a look at this and it will get you started. http://support.microsoft.com/kb/255504 Jim W MCSE CCNA Network Manager

I have my iMac running 10.5.1 bound to Active Directory. After doing so I was able to login using an AD domain user. Now it seem that after a week of not logging into AD with the iMac when I try to I cannot. Any idea's? Thanks. Jim W MCSE CCNA Network Manager

See if this is what you are looking for. http://support.microsoft.com/kb/814595 Jim W MCSE CCNA Network Manager