Search results for query: *

Hi, we have a Mivoice Business version 8 with ISDN lines to the PSTN. When an incoming call over the ISDN line has the calling party number presentation as restricted, and this call is send to an EHDU phone out over this ISDN link, there is no calling party IE on the outgoing call. I would...

Hi, you can use the internal MGU clock to sync the dect system. There is no need to have an external clock. Between MGU's you still need to sync via ISDN lines though. If those ELU31 boards are in the same magazin, either try replacing your mgu or your ELU31 boards. Rgds Joep

Do you have CIL on SIU active in your system? You cannot run CIL on SIU and on NIU in one system.

If the extensions have an External Follow Me active then the last External Number Redial doesn't work. This is due to the fact that the number for ECF and the number for ENR are stored in the same location.

The reason for having your external sync in LIM 1 is mainly for reloading. Reloading is done by lim 1. If f.e. in your example lim 3,4 and 6 are down, lim 1 will start reloading these lim's and for this time LIM 1 will use it's internal sync source (since no external sync is available ), at the...

Hi whosrdaddy, in TSW you set these with KS commands, I am not sure if that was also the case in BC12. I am also not sure if it is meant to be that way. I found that out when working on the above problem, it took me quite a while before I found it. btw, the text which was wrongly set in the...

I once saw this on a IP phone in BC12, that probably was a different problem but I'll give you the solution for that one anyway, maybe it helps. The reason there was that a certain text was not set. Print KSTSP:strno=all; for the language that they are using and check if all items have a text...

Be aware that although GAP compatible phones can be registered, that doesn't mean that they work exactly like the phones Ericsson recommends. Best you test first if all the features you want also work.

If you get a S0 line from a provider usually it has more then 1 telephone number. You can then connect several terminals to this line and give each of them a different number (Multiple Subscriber Number MSN). If a call to this S0 line for number 123 comes in only the terminal with this number...

Check if you have a MSN number programmed in the telephone. If yes, remove it.

Update to SP15. There is a fix for this problem. You will still need to restart slp60 and tlp60 to get the status right but afterwards it will not happen again.

There are free-of-charge numbers that do not send a connect message (no connect = no charge) instead of sending an AOC message that states that it is free-of-charge. Since no CONNECT is received you cannot enter DTMF digits. In this case you can set ADC D18 in RODDI to fake an internal b-answer...

Reload is not necessary, RFEXI also not. I usually do a SFCEI afterwards but that is only since sometimes the new LIM doesn't show all magazines. It is good practice to power off and on the newly added LIM to see if it reloads correctly.

Wenn you add a LIM, you add the program and data parts of the program units in the INL format. This means that these units do not have any customer data in them after they are loaded to the new lim. In order to add this data you must send a number of commands again so that the data is...

The first Board in the magazin must always have a Sync cable. If all boards are in the same magazin you must loop the Tx and Rx of the first board.

restart LSP in this lim

Also check with your provider if the CLIR option is available.

The MD110 doesn't know when a telefon is out of reach since the Base Stations don't keep track of this. First you must call a extension before the system knows about its status.

I think this status when the portable is out of reach is only recorded after a call to this portable has been made. Basically the system will not know about the status of a portable unless it calls this portable, if it is out of reach it will set the status to no info for so long until a...

It works like this. If I remember correctly the external number for ECF and the external number for redial are stored in the same place. I think this was done because after a call is diverted externally, the last dailed external number would be the number you diverted to.