Search results for query: *

Hi Daron, OK, we've tested the old cable. There was a short-circuit in the cabling. We 've putted an FTP cable and find out that the NIC on the PC was also not function. Two problems at once. The cabling for communication etc., will now be separated from the high voltage/current wiring. I think...

pleased to help you Kurtie

Hello there, Hardware : 2 PC's connected to a hub. We have placed Cat5 cables UTP in an industrial environment. At first approx. 5 month's everything was working well. After a certain time the communication between the PC's was going from good to bad. I have told our client to replace the...

Hi there, I work with ABB SC200 PLC's it uses ControlNet (DeviceNet) it works great. Watch-out for analogue IO, this makes your bus load heavy. I uses this for postioning with 7 nodes connected to it. the range is 1km but with repeaters you can go even further. Max 32 nodes. for further info...

Hello there, prescot9, this solved the problem thanks for the help. In my applic i'v also have built-in error-trapping program's and it works fine know. Kurtie

Hi Dale, Thanks for the help. And yes there is always someone that can benefit. The solution i've mentioned is sufficient for the moment but if the users will complain I have now another solution Kurtie

Hello, Thanks for the reply. I've looked and found a solution. In the file-save as- options, you can specify the way other users can open the file. Password protected, read only,.. . Every time a user tries to open the file a question is asked. Or you give the password or you can open with...

maybe a ms bug ? Kurtie

Hello there, I have maybe a stupid question. Problem: only one person must be able to change the excel sheet. other people must only look at it. When a person opens the excel sheet the other one cannot change the sheet. OK that's good, but what if this other person is the one who must be able...

Hello there, same problem here, have checked out these keyvalues. These are set to the same values. Kurtie

the modem on the server was too old Kurtie

the modem on the server was too old Kurtie

Hi, I have a nokia 5110 GSM with Nokia Data Suite 3.0a and a cable DAU-9P on my laptop W2K. Server Side is NT4 with RAS and a Tornado 336SA modem I want to dail in on my network,but.. The connection is made and is immediatly broken off. With a 3com PCMCIA card it works perfectly. I have tried...

Hi, I have the same problem. Someone has given me a usefull tip (prescot9) Some newer pc's have NICs that support being "Shut Down To Save Power". IBM laptops support this feature, and it's enabled by default! Although you're using a Compaq, try this to see: 1.) Right click the...

Hi, I have a nokia 5510 GSM with Nokia Data Suite 3.0a and a cable DAU-9P on my laptop W2K. Server Side is NT4 with RAS and a Tornado 336SA modem I want to dail in on my network,but.. The connection is made and is immediatly broken off. With a 3com PCMCIA card it works perfectly. I have tried...

Have you got all the rights of an administrator ? Are the shares accessable to domain users ? I think its probably a policy problem. Have you tried typing the name \\servername\sharename in the textbox instead of searching for it? Kurtie

to timbobrown I used that feature with no success. to prescot9 The two pc's are simply connected with a hub between them. Just 2 ip adressess in a workgroup. No server or VPN nor dailup connection. No DHCP. the tip you gave about net use I will install it we will see what happens thanks Kurtie

thanks for the info Kurtie

We are using Acad2000 architect V2.0 on NT4 SP4 Recently we had again a hardware key (sentinel) problem. A year ago we had the same problem. Any comments on how this can happen? Kurtie

thanks a lot Kurtie