Search results for query: *

here is the error i get when i enetered command file privilege 0 HomeLab(config)#file privilege 0 ^ % Invalid input detected at '^' marker.

here are my runing config Current configuration : 7554 bytes ! ! Last configuration change at 20:54:49 EST Fri Dec 31 1999 by admin ! NVRAM config last updated at 20:57:26 EST Fri Dec 31 1999 by admin ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no...

i was using an old xp laptop to access gui on cme (Cisco IOS Software (C2800NM-SPSERVICESK9-M), Version 12.4(24)T2), my laptop died, now i can use another lap top with xp or another one with window 10 i got the same results, i type the ip ,,, ,,, ,,, ,,,/ccme.html or the ip... ... ... ...

Thank you whyKap, i was going crazy trying to find out why there is no back light while any regular cheep phone with a display ( that was bought within the same time period) emit a screen back light Thanks Serge9

Hello Gens Does Cisco 7961, 7941, 7940 Screen is supposed to have Back light the contrast is ok, i can adjust the conteaste to darker or lighter but if there are no light in the room, the screen has no back light if there is back light, how can i turn it on? i have Cisco 2811 (revision 49.46)...

forget to ask i have the following files (as listed in my first post)on my CME router tftp-server usbflash1:Cisco/term41.default.loads alias term41.default.loads ftp-server usbflash1:Cisco/SCCP41.8-5-4S.loads alias SCCP41.8-5-4S.loads tftp-server usbflash1:Cisco/jar41sccp.8-5-4TH1-6.sbn alias...

Thanks Whykap, excellent detailed Road Map i down loaded those files, i will do the same for 7940G cmterm-7942_7962-sccp.8-5-2SR1.zip cmterm-7942_7962-sccp.8-5-2SR1.cop.sgn cmterm-7942_7962-sccp.8-5-2SR1.exe what is the difference between cmterm-7942_7962-sccp.8-5-2SR1.cop.sgn and the...

Thank You gnrlash4life, whykap The firmware i should be looking for should be something like cmterm-7940_7960-sccp.8-5-1.tar I could not locate it, so I guess it is note the correct firmware name! Thanks Serge9

i have Cisco 2811 (revision 49.46) 249856/12288k bytes of memory running CME bootstrap, Version 12.4(13r) release software (fc1) CME version 4 i have a few 7961G registered and working fine any time i connect 7940, 7942 to the 3750 switch , the phone screen shows upgrading and it stay there...

Thank you Pete720 i tried it, did not work, after hours of searching and analyzing, i learned that i should add auto assign DN for this type of phone (CIPC) in telephony service i did it worked, and i am happy Thanks Serge9

trying to install ip communicator on a laptop mac address format 00 !B 33 1A 24 39 not accepted in CME any way arround it i tried 001B.331A.2439 it tried to register, but got no dial ton CME Config is mac-address 001B.331A.2439 type CIPC Button 1:1 thanks Gens Serge9

done i figured it out thanks

ok guys i figurd it out the probelm was that i replaced the older 7951 with anoyher one so when it bouted, and it does not have a configured Mac address associted with so i had to delete the older mac address associated with the DN then added the new phone mac address, phone type, and associated...

how to change the phone type and mac address to 7961 i understand we must remove old config associated with the dn then remov old mac, old type then enter new ones please let me know if you can help supply commends example very much appreciated serge9

here are the router 2811 runing config User Access Verification Username: Admin Password: HomeLab>enabl Password: HomeLab# HomeLab#show configuration Using 6824 out of 245752 bytes ! ! No configuration change since last restart ! NVRAM config last updated at 21:15:12 EST Tue May 8 2012 ...

hi to all cisco call mander expert i am an old nortel, norstar and SL1 tech, not much knowledge with cisco your help is appreciated in a Cisco Call Managet Express installed on 2811 i had 2 7961G, 1 7906, 1 ip communicator, 1 analog phone, all were working very well i disconnected 1 7961G and...

I found out that there are GUI files for CME (version specific)must be dowloaded and extracted to the flash then, i opened a browser typed cme IP address/telephony-service.html example 172.20.14.1/telephony-service.html and here it goes i got access to the gui access to adminstrate CME typed...

Thank you very Much JPM121 i opened intrent explorer wrote the IP address Http:\\172.20.14.1 got the login screen entered the user name and the password i was in BUT it was in text it showed Cisco accessing Cisco 2811 homelab show diagnostic log mointor the router : HTML access to command line...

I got a home lab set with Cisco VoIP system (Phones, switches (3750 PS), Routers 2811) I got a friend of mine (lost his contact info) to install Call manager express and unity on 2811, He also installed Cisco soft phone, and Gui access to unity and Call manager express admin on a laptop And got...

Good day Gens I am X Nortel SL1 admin, i wanted to learn Cisco Voip, admin, etc I got a home lab set with Cisco VoIP system (cisco IP Phones, switches (3750 PS), Routers 2811) I got a friend of mine (lost his contact info) to install Call manager express and unity express on cisco 2811, He...