Search results for query: *

Hi all, By evidence, I will ask you a basic question. I have on my meridian option 11C two BRI ports. We would like to use these 2 ports to connect cisco ISDN routers together. So i need the phone numbers to access the BRI lines. How can I find these phone numbers? I try LD20/prt/dnb to...

I hope that I would be clear enough... So, we have an option 11C with 2 BRI ports, 3 PRI ports et 8 ports to connect modems. I have to connect a BRI line from my operator on the PBX.This line is called using one determined phone number. What I want to do is to forward the BRI call to a...

Hi all, Someone can say me how many lines could handle simultaneously the NTDK20DA Core Cpu Card of a Option 11C? What's the capacity of the commutation matrix? I ask this because I would like to make a test in load... Thanks a lot, PF

Hi all, I work with an Access Server with 2 PRI card (RAC 5399). All calls on one PRI card are forwarded to an IP address by default. I would like to attribute one IP addresse to a specific call number. I try this (config.annex) : %gateway route add default 175.175.175.171 %wan %pri...

==>Rack5565 : I would like to thank you . I follow your message (12/03/2002) and it seems to work! Thanks fro your help! pfg158

Ok, With LD 20, I see : DN 83 TYPE RDB ROUT 1 DN 84 TYPE RDB ROUT 2 DN 85 TYPE RDB ROUT 3 and also this DN: DN 7 TYPE CDP STCD DSC This is only a part of all DN printed with LD20/REQ PRT/TYPE DNB/CUST 0/DN <cr>. But when I use LD 21/PRT/RDB to print all the routes, I see : DMOD ROUT 1...

Rhack5565, OK, in your example: DSC 515000 FLEN 6 RLI - 0 DSC 515010 FLEN 6 RLI - 1 DSC 515020 FLEN 6 RLI - 2 515000 is routed through route 0. But does it always work for the number 83 which was routed through route 0 also? In other terms, the numbers 83 and 515000 will be both routed...

Hi, I'd like to modify the config of my PBX (Meridian Option 11C). I am afraid to make an error during handling so I would like to backup the existing config. I do not have PCMCIA cards and want to save the config directly on a PC via an Hyperterminal. Please, could you tell me how does it...

Hi all, I'm working with a Meridian Option 11C, with 3 PRI cards. We want to adapt our numbers (those we use in labo for tests) to those used on site. So, in our labo, the call number 83 is associated with the route 0, 84 with route 1, and 85 with route 2. On site, our customer uses 51.50.00...

My PRI cards work in a TIE mode (TKTP TIE)...

Kirchenlo, thanks for your help. What do you need like information about my 2MbPRI? Tell me which commands I have to use to give you my config... Pfg158

Yes, i have the Administration NTP (553-3001-311 ) but it misses several overlays like LD 87 or LD 49 ...

Hi all, I will ask you where I can find a document with description of all overlays and commands reffering each overlay. Thanks Pfg158

Thanks, but where can I find information about overlay 87 and 49? I dont't see this overlays in the Meridian Software Input/Output Guide (Maintenance).... pfg158

Hi all, I'm new in my job and I have to work with PABX for the first time. In our labo, we use a Option 11c between to connect &quot;modems&quot; ans &quot;Access Servers&quot;. We have 3 2Mb PRI cards and 3 different call numbers, each one corresponds to one access server. In a first time,we...