Search results for query: *

look at bios chip on motherboard note down numbers on it . Search these numbers on the internet. bios chip usually has a piece of foil stuck to it to cover uv hole in chip. Try searching for "motherboard search" or "motherboard finder". Look for any other manufacturer names...

search internet for "killcmos" program . Will have to set up cmos setting again as it wipes the cmos settings completely .

Suspect you have wiped out Cmos settings from a hidden partion on your hard drive. You could check with IBM as there will probably be a setup program that can write the information back . Try looking for an IBM web site in the support section . Compaq has this setup and I suspect IBM would be...

Problem may be caused by Guest account. Win 98 will be seen as a guest to win 2000. Add a guest account on win 2000 .

maybe one of the p.c's has the workgroup set on the network setting for workgroup. Check all p.c's id's and workgroup settings in network under control panel

Software should come with a microsoft certificate of Authenicity usually with a book and CD . The label has the Key on it . All microsoft cd's install nt without a specific key to the CD. Each customer has a specific key that licences the software to the user .The laws now state this certificate...

Check the services . See that the browser service is running. Check the event logs to see if there is failures . A master browser must be running but you can have other p.c's running as backup's . Event log will show elections occurring or failing .

look in phone book for computer recyclers . Unfortunately as technology improves they make computers in compatable with the earlier technology. One of the biggest problems is memory. When memory in the older p.c's goes faulty you will find that you can't buy new memory and it will no longer be...

ESD hazard . Make sure you are grounded before handling hard drive as electrostatic discharge can damage the hard drive . But down touch any live voltages when grounded as it could kill you while grounded unless a 1 meg ohm resistor is in the grounding wire .

Be careful with doing a low level format from bios as some hard drives use a drive translation and you need the manufacturers low level format utility to low level format without damaging the drive translation

Are you using Windows98 se as it is a bug for the shutdown problem .

If you are using IDE hard drives you must set the dip switch or movable links to the slave position on the hard drive that is the slave and the master hard drive might need to be set to master. You could use the second ide port on the motherboard and buy another IDe cable if it is not being...

In network properties there is a tick box for i want to share printer . When you tick this, windows will ask for the setup CD to be placed in the Cd rom and it will install the extra feature of printer sharing or file sharing without re-installing the whole of windows.but you need a windows 95...

This could be caused by a virus called w32.nimda.enc it was created in September 2001 . One of my P.C's has this infection and it duplicates Email attachments and copies them onto the hard drive . Update your virus protection and quarantine and delete files as repair is impossible good luck...

I made the mstake of adding a user and password in Win ME and when I deleted it Win Me still asks for a password . do I need to create a user called default without a password to have no login prompt of any kind ?

where is profile coming from . i had problems with profiles on a server that where downloaded to the desktop as the profile was mandatory on the server . I changed the profile on the server to *.dat and then deleted the existing profiles on the desktop before logging into the desktop as that...

check the real time clock chip . Some times motherboard manufacturer solder a battery directly onto the pins of the real time integrated chip. You may find the black plastic cover near the CMOS I.C will lift off the real time I.C. chip and then you can easily see if there is a battery soldered...

How can I get the shutdown menu to default to shutdown rather than restart windows in the list of options ?

pgp - program with encryption called pretty good privacy . Whole folder can be encrypted . folder in mounted as a hard drive once the password is entered . When you turn off computer drive is unmounted .

do this - Click on start -settings - control panel - system -device manager Click on properties . This will display the interrupt settings -check that the sound card and video card are on different interrupts and IO. Turn off p.c - Pull out the sound card (use anti static precautions ) Turn on...