Search results for query: *

how to network 2 x8 system by using E&M trunk( tmew2) .does anyone can supply a doc?

yes，i will try hard restart the system。Is there any necessary preparation work to be done before hard restart？

regen file

<dis-aps:,psgl,y*; DIS-APS:,PSGL,Y*; H500: AMO APS STARTED ADINIT STARTED PROGRAM SYSTEM : Y0-E30YC VERSION NUMBER : 60 CORRECTION VERSION NUMBER : 001 PART NUMBER : P30252N4802B00017|V6 R2.17.0 PROGRAM SYSTEM WITH CODE SUBSYSTEMS INTERFACE VERSION: PROGRAM...

1. 8368 is ready 2. not yet 3. not yet 4. 8368 can't call to 3254 5. yes ,other itr 5 extension call to 8368 is ok, itr 1 extension to 8368 is blocked 6. not test yet,but 3254 call the other itr0-4 extension is ok it seems althought i change setting 3254 from itr0 to itr5 or 6 ,it keep working...

<reg-actda:stn STNO = 3254&8200&8368; REG-ACTDA:STN,3254&8200&8368; H500: AMO ACTDA STARTED ADD-ACTDA:STN,8200,VCR; ADD-ACTDA:STN,8368,VCR; ADD-ACTDA:STN,8368,OPTISET,4,4,2,7,7,NORMAL,2,3,2; ADD-ACTDA:STN,8368,INHUNT,VCE;

3254 call 8200 is ok，3254 call 8368 is not ok <dis-scsu:3254; DIS-SCSU:3254; H500: AMO SCSU STARTED ------------------------------- USER DATA ----------------------------------- STNO =3254...

DIS-VBZ; H500: AMO VBZ STARTED | ITR-GROUPS (DESTINATION) ITR - | MATRIX | 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 |...

<cha-vbz ITRSRC = 6 ITRGR = ? ITRGR : INTERNAL TRAFFIC RESTRICTION GROUP CHARACTERISTIC : REQUIRED POSS. VALUES : AX ALLOWED:SOURCE -> DEST., DEST.->SOURCE UNCHANGED DX DENIED:SOURCE -> DEST., OTHER DIRECTION...

The extension is divided into two parts（itr0&&4/itr5), each limited to the other The problem is that the newly added extension 3254, no matter itr set 5 or 6, can always get through to the extension of itr0, can not get through to itr 5e Is there a solution that doesn't stop the phone service...

After reinstalling the hiapth 4000 assistant, it works normally less a month. the log below： Installing ASlmt (Appl. 54 of 64) ... Installing ASnbcs (Appl. 55 of 64) ... Installing ASpm (Appl. 56 of 64) ... Installing ASrds (Appl. 57 of 64) ... Installing ASsnmp (Appl. 58...

i am not sure,maybe u can try the GROUP DND feature. 1 set the room station cfdnd to operator ADD-ZIEL:TYPE=FWD,SRCNO=1000&&1300,SI=VCE,DESTNOF=0,DTYPE=CFDND,ITYPE=GEN,CFVAR=SYSTEM; 2 set these room station in a group scsu/sbcsu itr=xx 3 active and deactive the group dnd in acwinip operator

thanks laaz it solved it after i restart the osv.the command is“ etc/init.d/symphoniad restart”。 it isn't the root cause but useful.

I don't know what happened, but I can't log in to CMP。The username and password are correct

The root cause is i update the hipath4000 to version v6r2.17.0，it make the MOP patch useless。 it can be to solve after update to v6r2.17.2

The system time in Comwin will be change to year 2012 every day，how to solve it？ -------------------------------------------------------------------------------- Connection opened to: direct-lan 2024-02-21 09:57:50...

nec 9500 system

does anyone know how to setting the calling number in cisco CM?

hello I have a Hipath4000v6 , E1 Line (without DID,only main number 62588000)out to PSTN. so,i set "CHA-KNMAT: UNKNOWN,0,100,,150,,A ,ALL ,62588000,;"and cha-sbcsu:xxx,sstno=onlyext" to fit it. But now ,cisco cm networking with hipath4000,and it outgoing to PSTN from hipath4000. Both intemal...

Can I create a template for phone settings so that I only need to change a few configurations, such as extension numbers... when i configure the phone