Search results for query: *

Wanted to post here for posterity. I ended up figuring it out :) The key was comparing q931 traces from a call where caller name was successfully displayed, to a call where they were not. Here is a working trace (names and specific numbers changed for privacy) -- this was a call from another...

Thank you for responding! The PRI is terminating on a Cisco 2811 router ( I have 3 other PRIs on this box connecting together several other PBX's together ). I can confirm that the caller ID is being received on the system (it is displayed on the receiving Optiset when I dial from another PBX...

Hello! I recently added a Hipath 3700 to my home lab (I have an odd interest in old PBXs, my wife loves it....). Much like the other systems I have it is integrated to a Cisco 2811 via a QSIG PRI. I've been able to get the HiPath configured to successfully make internal/external calls, and...

Hello folks, I’ve come into the position where I can pick up a DBCS8 for a reasonable price for my home lab (it’ll join an AVAYA g3CSI , Nortel 11c and Cisco CUCM 12 tied together with QSIG PRIs on a c2811) and wanted to see if anyone here would be willing to help guide me on a few things: -...

Just tried removing the SCR from all but my desk phone, EDD'd, and rebooted the whole Nortel system. After 3 tests looks like its made no difference so far. I'll keep looking :) --- Thanks, Dmitry Barsky, REM

No worries at all. From what I can see in the Cisco logging everything looks good, and the detail of CP requiring a unique single appearance is very helpful in that I'm guessing Cisco's QSIG implementation would (hopefully) follow suit, so removing the additional SCRs I have for 3201 would make...

Thats a great point... I'll have to try this today :) I did try this *partially* this weekend, but with no success, but I think I need to take it one step further during today's test.... My current config is that 3201 appears as the Primary DN (SCR) on 2 phones in my home office, then I have it...

Hello, As always, I want to highlight how much I enjoy this forum for learning, problem solving, and interesting reading about nortel technical issues/configs/resolution. My latest home project has been a QSIG Cisco Unity integration to my 11c. All the general QSIG functionality works great...

Hello, Had an odd observation I made on my home 11c and wanted to see if this is normal behavior. I use a mix of phones -- mostly 3904s, 2008s and 2616s. When I update the IDLE_SET_DISPLAY setting under PARM in LD 17 the change applies across most of my sets within a few minutes (this includes...

Hey folks, I've got a bit of an odd question with respect to MWK on 3904s. Background: I have previously been using a 25.30 11c integrated to Cisco Unity via DMS100 PRI trunks. On the 25.30 system I was able to program key 16 as MWK 5000 (which is a DSC pointing to my Cisco Unity Pilot DN...

Thank you! PS -- thank you for pretty much everything you post here. Have learned a ton thanks to you sharing your wisdom! bc

Hey folks, Have a simple question with respect to the correct way to identify NTDK20 vintages. In short, how do I tell which NTDK20 SSC is newer and which is older. Is it simply that NTDK20xA where the 'x' increments alphabetically? So, NTDK20FA is older than an NTDK20GA which is older than an...

Awesome, thank you so much for sharing these details and firmware Firebird!

Thank you both FirebirdScrambler and StanleySteamer for the responses... It does indeed appear that im missing KEY 27 CLT KEY 28 RLT I went in an tried to add them and am getting SCH1370 which means "On the M3903, M3904 and M3905, keys 27-31 are reserved" which makes sense since they are...

Hey folks, Had a rather odd question with respect to m3904 softkeys and wanted to check if I'm perhaps doing something wrong... Background: I follow my standard process for setting up new 3900 series phones when I receive them, plug the phone in to a TN programmed accordingly, then I go to LD...

Thank you for the response donb01. I completely agree with your thoughts on the 'Redwood' naming being slang for some model number -- I'm suspecting this could be part of the reason I'm having a really hard time finding any parts or pictures of this system even. I've seen the classic rolm phones...

Hey Everyone, I mostly lurk in the Meridian/CS1000 forums but as of late my interest in the old Rolm gear has grown quite a bit and I'm thinking about obtaining a small Redwood to mess around with (I have a serious phone system problem/addiction with both a CUCM 8.6.2 and a Nortel Option 11c...

Changing to CFXA unfortunately did not make a difference. However, I was able to figure out another (albeit janky) means to be able to park calls from the Meridian phones to the Cisco Directed Park slots. What I did was set up 2 Cisco Unity System Call Handlers: 1) Park to 222x via 522x (this...

Cool, I've made the change CFXA change on my 2616 and I'll be able to test in a few minutes to see if that allows the parked call to complete successfully. Interestingly, ever since I changed TRNX to YES transfers of a call from a Cisco CM phone -> M1 Phone -> Another Cisco CM Phone, and all...

Answering my own question... :) In https://www.tek-tips.com/viewthread.cfm?qid=1699560 as described by KE407122: Customer Data Block. 1. CDB - LD 15 EXTT (NO) YES (Prevent) Allow connection of supervised external trunks via either call transfer or conference. TRNX (NO) YES (Prevent) Allow...