Hi, I used something like this for another application, You need to create a button and assign the VBA to it when you want it to run. Try this VBA:
Sub Button1_Click()
Dim cell As Range
Set cell = ThisWorkbook.Sheets("Sheet1").Range("C5")
If cell.Value = "X" Then
cell.Value...
I use this approach for something similar to save time balancing my check register. I have a 'Form Control' (not Active X) check box in each cell next to the check number. When the check is cleared, I click the check box, and it turns the check number cell green. First, the control only...
To stop all the span, I cleared the options to receive notices, emails, etc. as was suggested. But then again, I don't receive notice of the legitimate ones I DO want to know about. This solution would require me to log in multiple times a day and check all the forums I'm interested in...
Is anyone else having this issue? Since the upgrade I've been getting tons of Tek-Tips emails of forum messages for cryptocurrencies, unlocking a ransom encrypted hard drive, and as of yesterday, escort services. Here are 2 examples from my inbox:
The email's sent from address matches...
Is anyone else having this issue? Since the upgrade I've been getting tons of Tek-Tips emails of forum messages for cryptocurrencies, unlocking a ransom encrypted hard drive, and as of yesterday, escort services. Here is an example from my inbox:
The email's sent from address matches...
I had a similar issue with a Legend station card. The steps I used to troubleshoot will work as well on a Partner. I started by unplugging all the station jacks on the card where I was having the no-ring on the specific extension. Then I went extension by extension, plugging in a phone into the...
I found the same issue when I upgraded from the Plus to the Legend (Rel 7); in fact Touch Tone Tommy gave me the same answer a few years back. My workaround which has been somewhat less then ideal, was to add a 2nd button under the Page All button, labelled "Page Answer". This was actually...
Hi, I'm running the same console on my Legend (rel 7). While I couldn't find any information on the pinouts, the power unit (AT&T model 345D) shows outputs as 5 VDC 1.2 ADC - in case the picture isn't clear.
Did some more tinkering and solved the problem. Awhile back I got a tip on this forum that you could assign a CO line directly to an extension, so the extension would ring on the CO's incoming call, and when you picked up the extension (without an incoming call), you got the CO line directly...
I recently installed a Viking ACA-1A Auto-Attendant on my home Legend (rel 7). The Viking works up to the point where it transfers the call; it doesn't, and returns the caller to the main menu to select a prompt. I stepped this through with Viking Tech Support, and they recognized the problem...
I'm in the process of connecting a WE 24A16 LSI to my home system. When I connect a T&R from the LSI to a T&R extension from my Merlin Legend system, it works as normal (LED lights when off hook, LED flutters on ringing). When I connect my Landline to the LSI, it doesn't respond.
The BSP's...
I'm running a Legend Rel 7 in my home. One of the CO ports is connected to a Fixed Wireless unit which provides a T&R pair for your landline phones (complete with a fake dial tone). AT&T's name for this device is "Wireless Home Phone". It works as expected, incoming/outgoing calls are no...
Hello, I tried a reboot of the system, no change. Also checked error logs- all empty. Since this system is used in a home, there are never more than two users on the system at once! It is a 2 cabinet system, with 125 T&R extensions that act as CO lines to my collection of working 1A2...
I'm running Rel 7 in my home system, with several T&R only phones from the 016 Ring Gen card. What I notice is there is a delay to get a dial tone after a user disconnects from an internal call, even using the timed 'recall' button on some phones doesn't make a difference.
What happens is a...
Hi, In response to the questions....
As far as the Console not recognizing the Paging, is the Paging in a line port?
The Console is plugged into an ATL station jack.
By Page, I'm referring to the three page buttons that determine the extensions that the DSS displays. I have Page 1 set to start...
Thanks for reviewing Merlinman. The 'console' I'm using is the analog Merlin console (7318H01A). Station 0 is the 20 button MLX set with no DSS attached. Both stations show as "Operator" when going into programming mode. As you suggested, I have Page 1 set at 500, Page 2 at 550 and Page 3...
Question 1
I’m running a Legend Rel 7 in key mode. I’m using the supported DSS console from the Merlin II system (not the DSS adjunct that would be connected to the system console.)
- The console is programmed as one of the two Operator positions.
- My numbering plan is 0 thru 25 (MLX &...
Hi, Thanks Tim and Dexman for the ideas. I have a small UPS connected to my PC, and based on the Legend load, I can buy the same model again that will provide a minimum of 15 minutes power fail over. I'll go with that solution! My experience in Florida has only been momentary power...
Hello, I’m running a Merlin Legend (Rel 7) in my home (keyset mode). I have several T&R sets (Trimline and Design Line) that are connected to the incoming landline directly. In my home office, garage, and a few other rooms, I have the Legend MLX sets.
Is there a way to show the CO line in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.