Search results for query: *

Xpresstel

Hi all I have an SV9100 that has 6 SIP channels, incoming calls are no issue, outbound works well MOST of the time. However accasionally when pressing a trunk key you receive busy tone, which can last for up to 2 or 3 minutes before being able to again make an outgoing call. I believe port...

once again intigrant, you have helped immensely. The slave is now able to be seen in the master's Devise overview. It shows the slave ip, name, rfpi, device name & version correctly. Only issue left is that the slave shows NOT IN SYNC in red text instead of ok?

Thanks for that. I think it is all programmed correctly, however it is possible that the password that I am putting into the slaves DECT Radio is not that same as that which is in the master. Is this password ONLY used for the Radio Sync? if I reset it on the master will the 3720's lose their...

Hi guys have a setup with 1 x Master BS which is working fine, 3720 handsets registered fine to the master. However there are 2 new slave BS which I cannot get to sync.all running same 7.2 revision. Is there a way to identify the DECT Radio password on the master as this is possibly not what I...

hi guys looking for some help with a number of IPO R9 sites with VM Pro, that are SCN'd together. The issue is that each VM system is creating user & huntgroup mailboxes from all the sites, not just their own site. Is there anything that can be done to stop this from happening?

this system is on R6

Hi all have an SL1100 site using SIP trunks. SIP is registered all ok, utbound calls are no problem. However, after a period of non use either in or outbound, it seems like the SIP keepalive or similar is not active. No inbound calls are possible, until such time as an outbound call is made via...

Thanks Belvedere. Looking through the networking manual it seems to suggest that there is no way to have "common" park keys across both 9100's using K-CCIS? If that is the case, maybe someone has a better option. Basically what I am wanting to do is either have keys programmed on both sites that...

Hi All I have 2 x SV9100's networked happily, but I need to setup common park keys across both sites, any help appreciated