Search results for query: *

what Common control and other Card beside IP-PAD to Install and use DT 700 ip Phones on SV8500 Any Manuals that give more infromation! Fusion Network! Just the cards and types would really help! I know you need License also! Thanks for any help!

Thanks belevedere , look this over thinking why it took this long to do this but seem to remember REST Mode. Operator Feature could leave a message but thanks again great not many of these had ACD Groups!

Dterm Desk Phone Series I 16 Button showing R.I.P. Not the Time Date and Year Any one every had this problem? Thanks , Bill

Hello , Techs Nec Dterm Desk Phone Series I Display shows R.I.P. not time when Idle believe Some one left Message when 2 Extensions Busy programmed Message Button not sure is there a way to find the Extension that did this. Or how can you cancel it! Tried to Cancel but also look in Features...

Hello , All Tek When SV8500 Maintenance Diagnostics at 2:00 am lost main clock failures abound TSW Card failure Switch over failures PLO Alarms then rebound Clock Re-SInk and system Recovered from looking at Alarms.But all of sudden started have a few tickets come in with Dterm phones Prime...

How to enable call history log on SV8500 DT300 Phones Feature not Available = N I think was thinking and it is what shows under C-195 Manual SV8500 Manual SV8500 dpm- Business please let me know if everyone agrees with this! I think these phones only for sv811/sv8300 Systems?

Seen this post can anyone add to my question on this post Thanks , Bill Is Pa 16 ELCN- C same as PA 16 elcn - A-B Circuit Card I need more ports that will support DT 300 12 Button phone

Yes the Error was SMDR Buffer ASYD SYS1 249 Only but I seen where Command Manual mention Index 250 could be set lower or Higher possible fix this Error both index 249 AND 250 SET THE SAME = 0000000 But Thanks a Bunch on this other Command possible will help much down the road we where Slammed...

I have been working on SV8500 that many hands been in. But seen error come up SMDR size Buffer Error Index 249 and 250 Program same 00 Both set same any help on this has not happen but once!

Thanks All Our circuit card Manual show Analog Caller Id supported on this but from what I can tell you are right should just go on line and find out older version says no to caller ID. Thanks everyone again!!

We have 8 RSTY SW 375 A 1 E Register Cards

Yes Circuit Card Manual says this card supports Caller ID for Analog Desk Phones with LCD Display

Only Have PA-16LCBJ - B SP3251 A10A Will this Card not work possible

Hello Techs SV8500 Set SFC for Analog Phone sets Caller ID still not working will this work only with Nec Analog Sets and not other Company Display sets check asyd and asydl any one tried this or get it working Panasonic Single line phone display says it will work if Provider sending...

Thanks to all found what I needed in Circuit Cards but was in SV8500 Manual thanks everyone for the Help great help everyone many thanks, Bill

Need little help with Finding Manual for TSW pl0 pl0-a only have CLK 0 and it is on Pair 8 L11 Cable possible upgraded from Neax 2400 ims/ipx to SV8500 But cables flip over to CPU002 Any Links or possible CLK1 pair 7 or 15 MOH R1 TIP 2 Split. Can't find Peripheral Equipment Manual for 2400...

thread937-1702849 trouble adding 8 port analog card blade only has CCIs link 01.16.01 tried adding analog port card in slot 01.18.01 and 01.15.01 but in setup set card type LC8 apply then read reset to blank again.any ideas

Thanks belevedere good stuff Great Post of information for All Found My Answer CP-02 Thanks Again , Wild Bill

Yes I checked that Command DISS only show Software Version but not CPU Models looking to see if I have CPU00 OR CPU02 DID SEE Serial Numbers as CPU 1 = 2222-29CC-F704-A5EB-8689-DC27-31MC CPU 0= 2222-2AOC-6109-856A-F381-D4A2-3CsE

Does anyone know SV8500 Command that will show CPU Type CPU 00 or CPU 02 Or should you just get serial numbers on front? Thanks for any help!