Hi, i've a problem on a eMG80 ([Version] Appl(R3.5.21), Boot(2.0Da), Kernel(R1.1.32), H/W(0)) that ignores the language of a voicemail prompt: it keeps playing it in English (First/GS20Ab) instead using the settings (Fifth/IT10Fa)
In station VM attributes (PGM 127) of the voicemail station...
Thank you martinhodge, i've tried you advices but still receving on the station the number with 39xxxxxxxxxx and from the stations i cannot call back the number (as soon as i go to Received Call -> 39xxxxx and press ok i get busy tone and the message Normal call cleaning).
If i analyze the sip...
Hi,
actually we use the System Speed Dial to get the caller names on the stations screens.
Now, after buying some UCS license, we connected a LDAP Phonebook (on ActiveDirectory) to our UCS clients and we can saearch and call the contacts, but i would like to know if the eMG80 could check against...
Thank you it worked!!
so recap for the future: PGM 113 option 8 Caller Name Display ON and PGM 133 option 5 Caller Name Service on UNESED for all the SIP CO Lines.
Just another thing: i noticed that the ipecs shows the incoming number as 39 333 12345678 (we are in italy) but shoulden't the...
Hi Cody64
Thank you for the responde
The PGM133 Option 5 i set to "Use" for all the SIP CO lines.
I should select "Unused" instead on "Use" for the CO lines to get it work?
Hi,
i have a eMG80 with 10 LIP9010.
The eMG80 had a SIP Trunk for in/out Communication. The sip trunk does send the caller number, for example if i call from my cellphone i get +39 (Italy Prefix) + 3331234567
When someone call, an IVR start asking to select the correct Office, then a group of...
ok now i've tried if i call from CO, the Caller number compare in email notification repeated two times, the first with international prefix and second time without it.
Caller [CO +39123456789 123456789]
but if call 724 from a station i get
CO ---
Hello,
i would like to ask help to narrow down this problem.
I have a STA, 399, that i use for company holiday VM. This STA has VM enabled and is programmed to send the notification with the message attached via email and then delete the message.
I have a scenario that redirect all call from all...
Hello,
i would like to know if someone know if it's possibile to add blf feature to 3rd party sip expansion module like the SPA500S from CISCO.
I've tried to use this notation on a SPA 504G+SPA 500S
fnc=sd+cp+blf;sub=1742@192.168.3.156;nme=1742
if i click the button i will ring int station 1742...
Hello
we decided to upgrade the main site PBX from MG100 to eMG800.
So far so good... but we cannot manage to get out from the eMG80 CO from the eMG800 via network. We can talk to eMG80 station but we cannot take a CO.
For example i've tried this conf:
eMG800
PGM140: VOIU - DID - Common - CO...
Sorry to hijack this conversation but any hint to do the same between eMG80 and MG100? In my case i would like to use eMG80 CO across network from MG100 (network is up and running) I've tried myself and i managed to get the CO line opened on the eMG80 from a station attached to the MG100. I can...
Ok i give more info after some test. I've used mg100 trunk help page to start to configure the system. My aim is to call with eMG80 CO Line from mg100 station across net tunnel.
(both MG100 andeMG80 have net license)
MG100
PGM 321
Index 1 (Plan to call internal eMG80 station)
Type: NET
Plan...
Hello,
we have an mg100 with a trunksip on site1 and on another production site,site2, with an emg80 with another trunksip. They are connected and we can call between the 2 branches without any problem via our VPN.
I would like to ask if it's possibile to configure the mg100 on site1 to reroute...
i have tried to move the problematic digital lines to other dtib24 ports that were free.
Problems occours again. i begin to be more convinced that the problems are noises on the lines than a faulty dtib24 ports.
Hello,
we have an mg100 system composed by 2 bay, 2 slib24 card,2 brib, 1 dtib, 1 wtib.
Sometimes the LDP 7008D (and 7004N or older LKD) digital phones behaviour erratically, for example:
without any call in place, phone hanged up, the speaker phone activate automatically, display still show...
Hello everybody, i'm new to tek tips forum.
I'm work in IT management for a small company here in italy since 6 months where we have an LG MG100 with about 70 phones (mix of digital lg proprietary from promelit and analogic phones).
I don't know very whell the mg100 system, all i know is from...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.