HI
have had to create a "marriage" of 2 systems for a client
we have users CF'd to shortcodes that dial a number
ie.
8001
Dial
778###1234,,1,2580
LG 54
If this short code is in the forward tab of 2580 it works if you dial from external and go through the IVR
if you dial from an internal...
HI All,
we have a site with an SBC and an IP500V2 and an applications module running 10.1
we have talk path between and in and out with remote users utilizing one-x mobile and communicator.
voicemail messages and prompts though aren't heard, can see system responding.
initially thought it was...
Hi
we have 2 sites we are connecting via a SIP Trunk.
i know advanced networking will have additional features but just looking for the odd call to be connected.
both sites are on 10.1 SP3 and have SIP trunks with a carrier
both IPO's are using an internal IP x.x.1.x
the issue we are having...
HI,
we have a client where we have an SBCE installed as they are using remote apps, and have an issue
if we forward ports from the outside to the SE, communicator and OneX mobile work.
if we forward 5060 and the RTP range (leaving the rest going to the SE) to the B1 of the SBCE we can login...
Amriddle01
i agree but at least the client is up!
i will forward the carrier the port info again for the SCN.
its still a bit of a ticking time bomb i would say!
thanks for the advise
Hi
thanks for the feedback.
release is 9.1
before we use wire shark which has never been my friend
i think we will schedule an time with the client when we can reboot and try recreating the SCN
i will update when that is done with the result
thanks!
Hi
we have run into an issue where one of our multi site clients is changing carriers
at site B they have started the migration and replaced the router.
now as an outcome site B can call A but A can't call B across the SCN.
when asking the carrier they are saying they are not blocking, yet it...
Hi
we are having an issue where XIMA is unable to get the DNIS info from an SE
SE is 9.1.3 and we are using SIP Trunks, there are no other chassis or lines
in the info below you can see the SMDR stream shows the DNIS as 6045381111 which is what we are wanting to see in the Xima reports...
HI
Having an issue at a site that we migrated to a VM SE
the site has an IP 500V2 with expansion modules and a phone 16
there are a few fax machines on the Phone 16 that are not transmitting receiving properly.
has any one had experience with that issue?
thanks in advance
HI,
Been battling with an issue.
we have installed a 10.0 SP3 Virtual SE
One X server running on it
can connect to the one X portal as a user and change presence etc.
can log into the open fire and see users
can log into port 5222 from swift and chat change presence etc.
Communicator though...
after posting i realized that we use H.323 between the XT and server.
still Looks like the MCU isn't accepting connections.
checked all software and it is IPO editions?
HI,
We have set up the FQDN and still get the same response.
i notice in the below trace that the desktop server is trying to talk to the XT endpoint using H323 yet the endpoint is configured to the IPO as a SIP endpoint you can see after an H323 entry the call is rejected?
Any thoughts on...
Thanks holdmusic34
we will get that setup and retest.
i had assumed we should've been able to test internally with an IP.
will let you know how it goes!
HI derfloh
i haven't been using one as it is the embedded which only allows one to go.
it doesn't appear to require one?
i go to the URL and enter my name then click join.
i have tried utilizing the pin option as well, the system reconizes the pin but still gives the same error.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.