Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. yayayoyo

    HiPath 3800 call forwarding to external number

    you are welcome, even with target 2 it should work also .
  2. yayayoyo

    HiPath 3800 call forwarding to external number

    Hey, yes of course you can do it . Manager E : incoming calls -> call forwarding, choose a list number for day/night/intern-> go to that number and make the target 1, with "an external destination" .
  3. yayayoyo

    dect probelm+ lot of cards+OSBX8

    hey guys, i have a weird problem regarding the cards and the base station we installed a new OSB x8 with one extension box 11 slma24 2 slmu 4 slmuc 1 diut2 34 base station 7 LUNA my problem is some of the base station are not working almost the half, and sometimes one of the SLMUC dect card...
  4. yayayoyo

    Card Not ready

    which system and which card ?!
  5. yayayoyo

    OSB V2

    OK, did you configure the IP default router on your OSB !
  6. yayayoyo

    OSB V2

    first, did you do the upgrade properly ? did you try to ping the new control card directly from your PC ?
  7. yayayoyo

    hello just install sobiz x8 but

    Try to go here and set up the right time, Setup - Wizards - Basic Installation - Initial Installation
  8. yayayoyo

    OS Access PRI mdoule & OS4K branch

    thank you very much guys for everything you did, i can confirm now the modules were faulty .
  9. yayayoyo

    OS Access PRI mdoule & OS4K branch

    i just had this answer from our support, "It may be also that the Access modules you acquired are delivered more or less in the March 2018 time frame?? There is a problem ticket NA15837629 that was found out that there’s a problem with the FW of this module. " can anybody confirm this...
  10. yayayoyo

    OS Access PRI mdoule & OS4K branch

    yes of course here is the credential of the teamviewer ID: 498 724 892 PSW: 3888
  11. yayayoyo

    OS Access PRI mdoule & OS4K branch

    @Moriendi yes it should connect directly but just to see the packets with wireshark i used a switch in between . @hipath4k yes i already did this .
  12. yayayoyo

    OS Access PRI mdoule & OS4K branch

    . yes i've tried all of them and none work . . this is the last loadware from the partner portal Spec_LW_V8_R1_19_7 Pilot Usage 2018-08-23 . . i just did exactly what you said, mirroring on the switch for each module the "new" and the "old" PRI, the defect PRI is acting exactly like the ready...
  13. yayayoyo

    OS Access PRI mdoule & OS4K branch

    @Moriendi maybe the MAC address for one PRI was wrong, but i do have 6 PRI .
  14. yayayoyo

    OS Access PRI mdoule & OS4K branch

    @sbcsu here is the creation and the display of the bcsu . ADD-BCSU:MTYPE=DIU,LTG=1,LTU=30,SLOT=15,PARTNO="Q2335-X",LWVAR="0",FCTID=1,HWYBD L=A,ALARMNO=0,MACADDR=00-1A-E8-3D-4B-70,TDMLAW=0; ADD-BCSU:MTYPE=DIU,LTG=1,LTU=30,SLOT=15,PARTNO="Q2335-X",LWVAR="0",FCTID=1...
  15. yayayoyo

    OS Access PRI mdoule & OS4K branch

    Hey Guys ! i couldn't connect my new Openscape Access PRI mdoule (S30807-U6648-X170-16) to the Openscape 4000 Branch (V8 R1.19) , dis-bcsu -> it shows me "defect" . but when i use an old hipath access PRI module (S30807-U6648-X170-12 ) with the same configuration & the same OS branch...
  16. yayayoyo

    OSBiz X8: Receiving Fax through analog trunk

    Hello everyone, I couldn't receive a FAX in my fax box, through analog trunk (TMANI) ,knowing that sending with fax printer works well. Do you guys have any idea what is the problem of this situation ?! Thank you in advance !
  17. yayayoyo

    Unify & IPV6

    wanna share with you this, i found that IPv6 will be implemented in OS4K V9 and on V8 can be used only for the interconnexion with softgate.
  18. yayayoyo

    Unify & IPV6

    Hey guys, Can you tell me if the unify pbx (OSBiz, OS4K) work fine with IPV6 ?? for the phones i know the CP600 can be configured with it . Regards,
  19. yayayoyo

    Hipath 3500 V9 CDR

    for internal calls, i think you can not .

Part and Inventory Search

Back
Top