Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. jenkins84

    SIP Trunk CLID

    I have a customer who purchased an ALLWORX 6X and asked me to set it up for him. I have set it up with some temporary sip trunks from VOIP.MS and I have the trunks registered and can make calls. The problem I am having is that they want to be able to use different outgoing CLID information from...
  2. jenkins84

    Disable Asterisk transfer feature for single extension

    Ok, I have it set up as such. I did not build a second SIP trunk, although I saw that as possibly what I would end up having to do. I have the SIP trunk to the Digium G100 set on override with a T, which should allow caller to transfer, but not the called phone. When I dial out I can do a ##...
  3. jenkins84

    Disable Asterisk transfer feature for single extension

    Changed setting and tested. This does disable if I dial internal, but when I dial out I am still able to use ##. I am using a Digium G100 PRI gateway which is connected to UCx by a SIP trunk.
  4. jenkins84

    Disable Asterisk transfer feature for single extension

    I have a UCx with an analog extension on a digital gateway FXS port that is wired to an autodialer for underground monitoring at a coal mine. It is grabbing a PRI channel and dialing out to a series of preprogrammed cell phone numbers. The call connects fine, however the dialer asks for an...

Part and Inventory Search

Back
Top