Hello to all, hope you are doing great!!!
I wanted to know if i can configure a Cisco Aironet 1131AG access point as repeater, but with non-cisco AP as a parent is that possible? and if it is possible could give some tips of the configuration i need to have that working, i will be very...
Hi to all!!!
I got a question, what i'm trying to do is: I have 2 scenarios
First Scenario
Configure Cisco AP with different ssid's but with the same vlan, but i don't really know if there is an option to do this or if i need to create vlans to get this working.
Second Scenario
Configure...
Hi Andy that part of the mbssid guest-mode worked thanks, but i got another question, what i'm trying to do is: I have 2 scenarios
First Scenario
Configure Cisco AP with different ssid's but with the same vlan, but i don't really know if there is an option to do this or if i need to create...
Hi to all!!!
I'm trying to configure from the initial setup a Cisco AIR-AP1131AG-A-K9 what i'm trying to do is to generate a simple SSID with WEP or WPA security, i'm very newly un Cisco but i've noticed that i have 4 interfaces, what i did without good result was.
- Enter to the interface...
Hi montyzummer
First of all thanks for yout help,
I made a display errors command and the result shows many errors but for that trunk group in specific is the following:
Port Mtce Name Alt Name Err Type Aux Data First Occur Last Occur Err Cnt Err Rt Rt Hr State Ac
01A07 UDS1-BD...
Hi to all
Since this morning one of the main trunks group keeps failing when you try to make a call sounds like occupied, when this happens i reset the trunk with the command busyout trunk 4 and release trunk 4 and the trunk function again but in a few minutes the same, the trunk goes down, y...
Hi to all!!
I have a question i'm going to take the CCNA course and reading a little on the internet of the topics i am in a middle of a doubt.
I understand that if you want to communicate from 1 host(PC) to another host(pc) in the same segment (subnet), the OSI model tells you, the...
Hi tony sorry for the delay, i was repairing some problems jejeje,
with your help and tips you just gave me, right now it's working with the SAC button!!!, i just made test and worked just the way i wanted to, i really appreciate your help and i'm very grateful, i worked in a manufacturing...
ok Toni, first for all thanks for your time and tips,
returning to my problem, in the send-calls button only allow me to put an extension nothing else, if i try to put a remote cover, VDN,etc, sends an error, am i doing it wrong or configuring bad the SAC?
or you mean configure a button with...
Yes i did what MikeyDidIt suggested, and the same, if i make a call to the ext 29 directly, the call works ok, and yes i also tried with the remote coverage, because all the test i made i think what is not working is specifically the SAC button.
any other ideas? what i need to get it work is...
I made another test, i put a normal extension in the SAC button and does not work too, what do you think is wrong, first of all i think i have to get it work the SAC button because i think in that point is the problem, because the button does not work there is something that needs to be...
Hi Toni
Yes inside the office i called directly 29 from any extension and the cell rings, and from outside what i did is, i called the principal trunk and answer the PBX asking to dial any extension o call the recepcionist then i call the extension 29 and the call goes ok to the cell phone...
[sad]Hi montyzummer
first of all thanks for your comment,
I will try to explain myself from the beggining of my configuration,
first of all what i did is,
I create a Vector like this
Number of the vector 6
route-to number xxxxxxxxxx with cov n if unconditionally
Then i created a VDN like...
[sad]Hi mikeydidit !!!
Sorry but i'm a rookie in this area, could you please be a little more specific i only have 1 coverage path, or could you give me an example, or better if you can give me your mail i can send you images of my configuration, because iam desperate i need to have this done...
Hi Toni268!!
First of all thanks for your comment, i already tried configuring the send-calls button and in that button i put a phantom extension with a remote coverage, and in that way is nos working let me try with a vector and a post again the result.
Thankss any other ideas !!!!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.