Search results for query: *

Replaced it with the GATM8 and it made it a little better.

My initial thoughts are wet cables. Bell problem. Only other time I've seen anything like this is if it's an old BCM 50 v1.0 vintage motherboard. If it's too close to the central office, over time the line port burns out and this is the symptom as the problem progresses. I'd point to wet cables...

Well, after having tried all sorts of settings, I've come to the conclusion that it must be that the (really) old CTM4's with the jacks in the front don't have any ability to alter the volume or line settings. I've tried all sorts of short CO, long CO, short PBX, long PBX and I'd really like to...

I just replaced an older BCM1000 3.7 with a BCM450 6.0 and although everything works fine, the customer has complained about low volume when he re-records the information mailbox(es) from outside? Nothing has changed with respect to the hardware modules as I put his existing CTM4's and DSM32...

So, no closed doors on Element Manager?

Thanks Curlycord! Any updates on anyone coming up with a user format to achieve a customer restricted access to the element manager allowing speed dial programming at the minimum and whatever other doors may be needed to be open keeping in mind that we don't really want them to be able to mess...

Played around some more with these so called "Accounts and Privileges" and I don't seem to know what any of them do to allow you access to either nothing or everything? I put up SBA-Basic and you only get to change your password and see nothing? Is there some combination that would give you the...

I seem to think that Element Manager, (maybe on 4.0) had the ability to grey out whatever areas that you didn't want the customer to be able to access? But, perhaps I'm thinking about the Avaya IP Office Manager?

Hello Firebird Scrambler! I know it can be done through the telephone set, but that method is so tedious to enter the name of each speed dial entry. So much easier done on a keyboard, but alas, I don't see any way to open the doors without letting kids into the candy store?

I checked the active call limit in the accounts section to see what it was set to and it was left as default which was 0 figuring that if you didn't set one, it was as determined by the carrier. I figured that likely the only time you'd set one was on a BCM50 with the 8 SIP trunk limitation? It...

Not to monopolize the forum with multiple questions here, but I've been working on a bunch of stuff lately and although I searched for any answers or restricted Element Manager through setting up a separate User account, I could not resolve getting some kind of "admin" type setting to keep them...

Voipms

To Curlycord and Exsmogger, I'll continue to use an account generated and put into place on GMail for now as it does work (only when you set "Allow less secure apps: ON") as I tried all the settings you suggested Curlycord and Bell just won't work, so I'll stop fighting and take the easy route...

The virtual DN's all had 5 IC appearances just to make sure that there would be no issues and they all of course have line pool access to BlocA but the limit seems to be 2 calls presented so far. The SIP lines as per my provider are supposed to be open to a lot more calls than the 2 being processed.

I appreciate the help here & thanks FirebirdScrambler as well. I have got the service up and working as I said, but only on GMail. It will not work with the same or similar settings on Bell's email server unless someone else has managed to get it working with some other settings. It just turns...

Hey Curlycord! I think I have those settings in place as I'm currently using the Gmail to do my testing, but I did have to change the GMail account settings to "Allow less secure apps: ON" in order for it to work without GMail blocking it after the first message forwarding attempt. I'll try...

I've spent time playing with settings trying to get Message Forwarding working with a Bell Fibe service to no avail. I got past the initial settings which changed the alarms from one type to a "44010 alarm". Each time a call is placed the forwarding is turned off and the alarm generated. I...

Ok Curlycord! I managed to change a bunch of things and get everything working ideally! The only remaining thing that I can't seem to figure out is that although the it will now present multiple calls (2) I have it set to 3, but can't get the 3rd call to go out? It's more a curiousity at this...

Curlycord. Found the multiple calls under the Class of Service in the CallPilot, so I'm testing it now.

Ok. Thanks Curlycord! I tried your settings and by putting the phone number in the PAI CLID Override and setting last redirect, the phone number shows up on all calls both dialed through the FMFM as well as dialed from a set within the premises. So it seems to override all outbound CLID. As...