Search results for query: *

Thank you all for the guidance. I got hold of a butt set, plugged it into the page port on the ACS and was able to hear the page. I then used an old line cord and ran that to the amplifier using the red / green wires and now we have a paging system. In order to use I*70 I then added all of...

So, after looking at the Bogen manual link that you provided, there are 3 screws for input on the MIC5/TEL. The center screw appears to be a ground, so the red / green wires should go to the outside connectors correct?

Thanks for the quick responses! OK, that may have been part of my problem. I was only using a 2wire connection from the page port, but if the black / yellow are not connected at the bogen does it really matter if it is a 2wire or 4wire connection? I guess that I should have asked a more basic...

Newbie here, A club that I belong to has a Partner ACS R3 system installed. Single telco line, with 3 extensions. I would like to configure the unit to use the page port output to feed a Bogen GS series amplifier. When I put the ACS unit in it was set to factory defaults, then the date /...

Thank you for the feedback! While I agree that it is not worth sinking money into old / outdated equipment I also have to balance the needs of the club and the financial cost to update the system. Used ACS systems on e-bay are starting around $450 and going up versus $0.99 to $75 starting...

Hello Group! Newbie to phone systems, but willing to learn. I belong to a club where a former member installed a standalone 206 R2.0. We have one phone line and 3 extensions. The person has since moved away and I have been selected to take over the duties. We have had an issue where...