Search results for query: *

thanks Sbcsu it was that easy :)

Hi I have set up a SIP trunk to a SIP provider (COLT). I am able to receive calls on different type of devices. I am able to call out with SIP devices but I am not able to dial out with HFA devices. With HFA: when dialing out it start ringing Busy after entering 5 digits, so I am not able to...

Hi Chumen did you get an answer or any help this topic ? I am also trying to get the Openscape Accounting configured but I struggle with the useless Unify documentation. kr Toufik

Hi is anybody have a walkthrough in order to configure SIP-Q trunking between hipath3000s and an hipath4000. at the moment the trunking between them is done using H323, but I would like to migrate to SIP-Q. here is the actual status : 2 STMI cards configured on the H4Kv5, one STMI for the H323...

try the followings .. 18140815 18140815 then from the manager - under security - change password

Hi Jacques, I would - create groups in "Incoming calls" - "Groups/Hunt Groups" - change 100 to 101 - create a hunt group linear 100 with members 101 and 110 and another group 200 with member 101 only

Thanks for your answer sbcsu, not solved yet, trunk protocol is PSS1V2 - Segment is 8 already. what is the difference between ECMAV2 and PSS1V2? PSS1V2 : "Cornet-nq issue2.1 dec.96 basis etsi" ECMAV2 : "Cornet-nq issue2.1 dec.96 basis iso/iec" The trunk is in prod with other equipments...

I would go in the KNDEF and modify the ISDNSK (number of digit to skip) I work with 4 digits extensions i.e ADD-KNDEF:NNO=1-41-225,TYPE=OWN,ISDNCC=41,ISDNLC=22562,ISDNSK=0,ISDNUL=EXT,PNPLC=370,PNPSK=3,PNPUL=L0; here 0 digit to skip because the numbers the num I receive is +41 22562 XXXX...

you can use the bat file fullbackup in \Siemens\xpr\res\maint

if you have spare BChannels use one as a new Trunk Create a new route without "route prefix" Create a new dial rule in the dial plan using that new route Put the fax extension in a new COS that allows only that route this should work ...

it is replacing h3k v9 you need : - Manager E v10 - ISDN Modem x75 on your computer - Main BRI phone line number ?

Hi does anybody know how to do IPtrunking between a Hipath4000 v5 and an Openscape business v1. A STMI board is set as a trunk / gateway on the h4k and used for all the h3k nodes. I am already using this feature with Hipath3000(CORNET-NQ trunks) and working fine, but the same config doesn't...

Had the same issue with when upgraded the from XPRv5 to XPRv6 I had to regen the user extension, delete it and recreate it: reg-sbcsu:xxx; REG-TAPRO:STN,xxx; REG-ZIEL:FWD,xxx; REGENERATE-ZIEL:TYPE=SPDI,SRCNO=xxx; REG-ZIEL:DSS,xxx; REG-ZIEL:NAME,xxx; REG-ZIEL:SPDI,xxx; reg-actda:stn,xxx...