Search results for query: *

OK I have audio for analog phone works but wont handshake with faxes either in bound or outbound is this a mitel 250 issue or a audiocodes mp-114 fxs issue . its running 6. version software

Setting up the audiocodes 114 fxs , it works fine for internal calls from other ext. but when i point a pots line or trunk to it from the mitel 250 it acts like the device answers but it doesn't ring the analog phone on port 1 , ( which will eventually be set up as a fax machine.) then after...

Im Having trouble getting my Non-Dial in loopStart to point to my AA I think I did correctly VM box 1 set to menu , then I have (0) going to LDN for outside calls 181 , (1) im trying to set up to transfer to reservation 9,1800-#######. my first issue is im not sure what needs set up in COS COR...

yes I have it set up automatic wake up for this Tennent as the HG 601 that has the vmail ports that im using

OK First for me, LOL it was nothing in programming it was me, I have two power supplies in the chassis but only connected one of them two power to program the system. plugged in second one and no alarms. thanks

So I just set up a new system sx200 AX and I am getting an Major alarm but nothing on the console. I have the alarm enabled in the COS. I cant clear it. , I dont have any analog ls plugged in at this time. Not sure if this is the issue or not but I cant seem to clear it. Any ideas. I also dont...

thread1329-1741556 I set up Rad , then form 17 pointed it to the Hunt group. but the guest doesn't hear the audio even though i can go and listen to the audio in the rad set up the greeting shows 10 sec recording in the hunt group options . Any Advice or guidance Please. Also it worked at one...

My test keeps failing , I did the setup like in the book using the trucks pointing to one loopstart line and the one to pointing to one of the others. And it fails I did check the ma today and they are at 32ma. Also found out the console doesn't give dial tone sound when you press the outgoing...

I have a latest release for sx200 ax where outside call quality it echo, delayed and picks up cross talk and apparently according to customer the far end conversation from cell phone calls were the cell call is over 6-8 feet from the phone in use. Phones affected, 5312 ,5330e and 5540 console ...

No micalab, I will have to figure out the process to have the controller deleted from the cluster and my guess any reference to the controller, I'm still not sure why customer wants to do this as it takes away from the resilience of the system. Guess the tax dollars spent well

I will check

The pms is sending the checkout and the system is acknowledging it. The room phone gives a small ring , the names are removed from the form 9 and 50 , I did a reboot to be sure, had the atrio pms tech reset his software , it is cloud based with server on site and using ip connection for...

Here is what I have , not sure if it matters but it free local & ld calls , see attachment link for screen shothttp://files.engineering.com/getfile.aspx?folder=9c1adfa1-371b-4af0-929e-7448fdfaa913&file=image.jpeg

Ok fixed a few issues , call pick up works and volume setting was issue do to my part not paying attention to cos I put the ip phones in. I had them in the console cos and it affected the volume not being able to save and very well the call pickup too. Thanks you all for your help, Last issue...

Customer has 10 sites clustered on the 3300 they want to take users off a system that is clustered and put them in a teleworker set up on a MBG that is pointed to another system that is also in the cluster, ecentially removing one of the controller out of the cluster.

I have tried the not up all the way but I have been using the press both arrows and tried pound after setting to volume level other then full, but maybe don't do anything after I set it to the volume level ? I will look at the pickup issue because we can't even pickup on directed dial *09 and...

Ok it was a router issue it was the customer router causing issues.

I have a customer that has 10 Mitel 3300 clustered togeather , Nupoint and stand alone boarder gateway , customer moved on controller to be the stand alone MBG main controller now wants to move all users on another cluster controller to be teleworker phones. I am looking for any best practices...

What firmware is the sx200 at?

Customer has issue saving the volume on the handset 5312 phones and 5340 sub AA phones. I have tried to hold both arrow key and tried # , I looked in the blue key only found the ringer there. Any help ? It's the last release on the sx200 software available. Second issue customer wants to...