Search results for query: *

Hi all, Can anyone recommend a firm that might have any Doorphones ? I need one for a customer but are having problems sourcing one.

Hi all, I have a BCM50 R3 and have purchased a IP Seat. Has anyone got a guide to set it up. I want to use a IP 2002 phone and the BCM sits behind a ADSL router so doesn't do DHCP. Any help would be great. Thanks

Time Break Recall

That's a shame then. Originally I had an ATA2 which worked but didn't support CLI. I buy Keycodes for Internal Analog sets only to find out that Internal Analog sets don't support T/B Recall. There are so many limitations here. Please correct me if I'm wrong.

I have an BCM50 with 2 Internal Analog sets. How can I access features from the Analog sets. I know with an ATA2 you use the 'Recall' button, but this doesn't happen on the Analog set, have I missed a setting ? whenIi press Recall followed by *I just get NU tone. Andy

It's the DECT Phone (BT Verve 450). When I use a normal phone it works but the DECT take ages to ring and then doesn't show the CLI until after the call. Any recommendations on a DECT phone that works well on the BCM50 ?

I think it might be the DECT phone. When an incoming call comes in it first just shows 'external call' but if you don't answer the call and the caller hangs up you then get the CLI. I will try just a normal phone in the socket and see if the CLI comes through. Many thanks for your help.

On the Analog settings I still get an 'ATA Settings' field under 'Capabilities and Preferences' do i need to set anything here. Strange that this option is available when it's an internal Analog. I will do a cold reset and try it again.

Right I bought the Keycode for Analog sets and now have Ext 233 and 234. I'm still getting the same problem. I have assigned line 061 to Extn 233 and ticked the CLI on the Line Access under Sets. However when a call comes in you just see 'External Call' appear on the DECT phone. The CLI is...

Many thanks Guy's

So i would need a keycode for an Analog set for it to work, and not use an ATA.

Hi All, I have Installed an ATA2 which the Customer has put a DECT phone on. I can't get the CLI to work when an incomming call comes in. I have read that the ATA2 does support CLI. Is there a specific configuration for line access programming on the ATA2 Set ? Many thanks.

I wanted to just pick up the Analogue phone and get the 061 line but if I wanted to call internally I could use Recall, could that be possible?

Thanks, worked a treat. How would I get back to the internal system from the analogue phone. Could i use recall? I can't see where that setting is.

Hi all, I have fitted an ATA to a BCM50 R3. I want the Analogue Phone connected to the ATA2 to just pickup line 1 when lifted, I don't want to press 9 first. Can this be done? Any help would be great. Mant thanks