Search results for query: *

Unplugging the firewall will block all access to any websites you are trying to block. [thumbsup2] OK. Just kidding. I agree with last post. Have great day...

Well, I don't see where you have allowed the IP address for your workstation or the network address for whoever is on that network to be allowed to run ASDM on the desktop. Also, connecting to the firewall will be over SSH. example. ssh 10.16.1.XXX 255.255.255.0 inside The 10.16.1.xxx is...

All IMO Well, I would generally not recommend this. There are internal termination within the system. This could especially be a problem if the Newly installed device has the same SCSI ID as something currently running. Other than that, I would make sure when you plug the drive into the...

Sooo.. Getting back to this one. I have done 1 test with the following 1 DL380 G3 4 18 GiG hard drives 1 18 GiG had drive to add to an array and allocate the additional space. Here are my findings. I built a Windows 200x server with HP Insight manager. Generic install. Raid 5. I then...

Hmmm. Good question. So I've got to ask. What is the 515e used for?? I know the 525 /535 will support IPv6. I think this started around version 7.x into the final version of v8.04. Funny, I took my Pix offline about 6 months ago because I could not get anyone to work with me to get IPv6...

Soo. How large are the drives now and how large to you wish to grow this puppy?? (physically how many drives do you want to add and logically how large do you want the volume to get?? Beware - C$ might not be able to grow without a rebuild. Build the boot partition large enough to...

Well, I think this drive even though it is not spinning or in use, has been Identified. The server knows what kind of drive it is when the array was originally setup, So, if you don't replace this drive in the beginning, and rebuild the array, I think the system will have a brain fart if...

Sooo. Are you not able to do anything?? I see an access list to permit ip I don't see anything to allow ICMP to test for pings?? (Maybe this is only needed on a Pix 525 which is what I have. Another thing is you might need to (after entering the global command above) clear all ports. I...

Well, has anyone tought of asking and confirming that the wire is cat5e or Cat6 or above??? Start there and confirm. I would imagine the cisco switches can be setup to auto sense. This being said. Upon getting the correct cable (Don't forget the correct connectors for the cables as well (8P8C...

Hmm. Well, unfortunately, I am dealing with G3 ventage equipment. I have not seen anything newer. I would imagine the batteries should be good for 5 years. After that, all bets are off. I would just replace it. Cheap enough. No matter what you decide to do, make sure you have several...

I'll buy that. Since the array is being rebuilt base upon the number of drives replaced, this amount must be added. Totally agree. Now. What about the online spare?? No issues with removing the existing and adding a larger one?? Several ways to do this. Either remove this until the...

AHHH. I went back and read the document again. I'm sorry. I made a mistake. The rebuild time is 15 - 30 SECONDS per gig. Whew...... Thanks for asking again... I'm glad I went back and review the document. Sooooo.. Here we go again.. Worse case.. 30 seconds per gig 4TB = 4000 gig...

Hi. Thanks for the reply all. I would expect that each drive takes about about 15 minutes per gig so, the rebuild would take a very long time. My only concern is that upon adding the last drive, the jump for the partition will be rather large. I understand the boot partition might be a...

Hmm. I thought the server fan ran no matter what. The fans will only shut down when the server is so cold, the outside air is keeping the cabinet so cold, it's almost in the lower level of it working capacity. So, the fans should be moving some air I thought. The fans are variable. The...

Re dl360. I would do the following first. 1. Try to find the correct smart start for that server. You might be looking for a version that is not on a DVD. 2. Dl360 G1 possibly doesn't have a DVD drive in it. 3. Make sure you upgrade all firmware first. This includes the server...

Hi folks. I have an interesting idea as to how to expand an Array. Has anyone tried this. Since we know if running Raid 5 and above, there is a fail safe where if one disk is destroyed, one can simply remove the drive and install a new one to replace it. So. How about this idea. Say you...

This is an old message, but, I am still wondering if someone out has a Pix 525/535 and if someone can give me a sample ipv6 access list in order to route ipv6 packets from the outside interface to the inside interface. Thanks

Hi. I'm glad you found the problem. I was going to suggest looking to see which users on which segments can connect and which ones can. If non can connect, then I would have suggested something is blocking the connection to the webserver at a router via an access list or a firewall like a...

Hi. I have a similar sitation. I have a primary/secondary DNS server and I can't seem to get DNS info through my servers. I suspect, my provider is blocking udp protocol 53 which is why I can't resolve anything. I can use their dns server without any problems. I don't think may ISPs...

Question. I'm not familiar with Windows current products, but the above is true. So. without WINS, how do are you suppose to get around a Windows environment these days. How are you suppose to locate servers located on different networks without WINS??? Thanks