How do PC's connected to IP phones aquire IP address, Do they get IP address assigned from the DHCP server data pool?
I know Phones are assigned IP address from DHCP voice pool !!
Thank You...
Hi,
Customer have given us the following IP address ranges,
Telephony Servers- 10.60.130.18-10.60.130.254 VLAN-154
Network Management- 10.60.34.18-10.60.53.254 VLAN-38
IP Phones- 10.60.82.18 - 10.60.90.254 VLAN- 80
We have 1 duplex CM, 9 G450 gateways,650 IP phones, DHCP/DNS/HTTP...
Thanks Randy!
What should be location of Avaya Rack in computer room?
Does it make sense to place it near PRI OR Avaya rack can be placed anywhere in the computer room?
Hi,
I have been tasked to create communications room Layout.
I think Avaya rack with duplicated CM and G450(7) gateways should be
near PRI connection and have Cisco Core Switch rack beside Avaya
Rack. is this correct?
and we dont have to worry about Demarc room correct?
Thanks
phoneguy55,
Does both PE ports for each server have same IP address? Which
Ethernet ports you used as PE ports on DL360 HP server?
CAn i Have HA with CM Server1 PE port connected to LAN switch1 and CM Server2 PE port connected to LAN switch 2?
As per my understanding system domain (Dom-0) is...
I Have one SAL R610 server and two integrated management servers with Duplicated CM 6.
can we configure SAL after setting up core CM?
How many IP addresses and lan switch ports are required for SAL gateway and AIM servers? I assume one IP and one port for each server.
Thanks.
Thanks Mitch!
I also has CMS, SAL gateway server and integrated management FPM and Config severs.
I assume one lan port per server. Pls correct if wrong.
Also Can i setup HTTP on my DHCP server?
I have Duplex CM 6 on HP servers with 6 G450 gateways.
How many and what kind ports are connected to core cisco LAN switch?
My understanding is 2 eth0 ports for each CM server and 1 port for
each g450. Am i correct?
Also the two PRI's are connected to e1/t1 port of first 2 G450's in the rack...
Thanks Telm59 !
Here is what i think i should assign, pls correct me if i am wrong!!
CM Server 1(HP DL360G7):
Virtual active IP address(PE)- x.x.x.11
CM IP address- x.x.x.12
Cdom IP address-
Sdom IP address-
Sal gtwy IP address-
CM Server 2(HP DL360 G7):
Virtual active IP address(PE)-...
Thanks!!
I have 2 HPDL360G7 Duplex CM servers...Do i need 9 IP addresses per
server..that means total of 18 IP addresses for 2 servers?
Please confirm.
Hi,
How many IP addresses are required for duplex CM 6.x ? How many IP addresses are required for G450?
I assume we need 5 IP addresses for cm 6.x in duplex mode,
1. System Domain 2.Console Domain 3. PE(Alias for G450 to register) 4. unique IP address for server 1 5. unique IP address for...
How many IP addresses i will need for Primary/backup media server(duplex cm 6.x) and g450's? I assume 2 IP's(cdom and Dom0) for each media server and one IP for each G450.
Thanks
Thanks Tolson !
I need to create a design document with cable/wiring diagram to G450 and media server.
Can you share any design doc/application notes you may have for this solution?
Hi,
I have HPDL360G7 media server(CM 6.x) with 7 media gateways(G450) and 2 PRI's.
1 location, 1 NR, only reason we have so many gateways is we have lot of analog phones.
I know Each PRI is connected to E1/T1 port of G450,if that's the case then i would need 7 PRI's for 7 Gateways.
Can...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.