Search results for query: *

This customer has port 80 NATd to a web server and we are trying to get a remote worker phone up using HTTPS. I cant seem to get the phone up even when modifying the 46xxsettings. Has anyone run into this situation before? Using another public IP address is not an option unfortunately.

Has sanyone been able to figure out what IIS component is missing during the install of VM Pro with web campaign. The customer is using it. I have started fresh and followed all docs i can find. Every service is running and i have installed every component i can. Any documentation would be helpful

these are the same settings i have. We have used this same setup at other locations with no issue

Has anyone backed up an Application server to a UC module on an SCN. Not server edition? I have the SMTP settings set up like any Primary and secondary server but no communication at all. Nothing show up in logs either.

The trunk actually never drops. Calls just won't complete. Hits the channel but routes nowhere. This seems to be a common issue on the lower software CS1k but we. Moved it to a newer and the problem followed. I had this exact set up at another customer with zero issues

We get zero errors on both sides. Not one.

Yes resetting the trunk or rebooting the IP Office fixes the issue. D channel looks up and all channels idle when having the issue.

Any caller ID?

I have an IP Office Server Edition R11 connected to a Nortel CS1M PBX via QSig PRI. PBX is 7.5 i believe. Every day 4 digit dialing fails. I reboot the IP Office and it recovers for another day. The channels are idle and i can see the calls hit on both side but the call wont complete. I believe...

Looking to reboot an IP office every 2 days automatically (Don't ask why please). Anyone ever come across a way to do this? It is a V2 on a server edition network.

I have a customer whos QSIG PRI needs to be reset every 2 days due to the software level. I am looking to automate this with windows scheduler and a script. I am very unfamiliar with writing scripts so any and all help would be apprecited

I have deployed equinox on a windows 7 and 10 machine and am getting Access to Avaya Equinox contacts is currently limited. I have tried with and without TLS. Dont see any known issues. Any help appreciated

Even after regenerating all certificates they still get stuck on Acquiring Service. The certificates are all valid and if i turn off TLS the phones boot fine. This was working before the new certs.

Yes and Yes.

I currently have a ticket open with Avaya but they are not finding anything so i figured i would put this out there. I have a 10.1 service pack 3 server edition with 9608Gs. RANDOMLY the phones will lose the following buttons...VM, call log, contacts, mute, and speaker. The return a tone only...

Thank you for your response. This is working with the settings i posted previously. It was actually working all along they just programmed the 5290 for all call so i was never hearing the paging tone. Again thank you for your help

Looks like i am now connected with some tweaks to the SIP lines as my IP Office is 10.1. I can see the line is connected and the Telecenter accepts my "call" but i hear no dialtone and can press no digits. Any ideas? I am thinking its the paging system at this point. I uploaded the config. Note...

Will try. I have everything but the URI you listed. Wondering if they have their side configured properly. Thank you and will update you

Good Evening all, Wondering if anyone out there has set up a SIP connection from an IP Office to a Telecenter paging system. No documentation from Avaya, the paging provider, or the paging manufacturer. Any assistance would be helpful.