Search results for query: *

Dear All, I have a customer with ACCS 7.1.2 on Avaya IPO 11.1 Server. Just Updated Unfortunately this Customer, for scurity reason has uninstalled IE from all infrasctructure computers. I've jut seen on Avaya Documentation that MS Edge is supported. But not directly, only with IE compatibility...

The Customer has an Old MXe in Release ICP 8.x.x.x He's using the OPS Manager to Reroute the Calls (Always, Reroute no response etc.) When a call is Placed on a Phone with RNA after 15 seconds to the Voicemail. - From Internal Calls : The Call is already going to the Voicemail Box after 15...

Many Thanks for the Feedback Bisco1976 ! In fact, I've already do an Upgrade from the specified Server (First Post) The 802.1x does not work anymore. I've push the Old Firmware given by Mitel, and it works. I mean Mitel has not solved this problem on all the 69xx Firmware Nice because it works

Many Thanks effort1584, My installation was done on W2k12 in French version. Avaya has the same problem to install. It's better to Install Always in EN-US version for the OS. Many thanks for your reply

Yes sorry, I need this delay because there are some intempestive Calls which are provide alone. Perhaps an electrostatic problem but I don't know. I thinks I can fix the problem if I add a little delay before the Call is donne by the phone.

Sorry, infact: It's when I make a "Off-Hook" to begin a call. There are somme security phone which are dialing on off-hook, and i need a little delay before dialing or tonality Many thanks if you have information about this

For Response, I've create a case by MITEL Design and it was a Firmware Problem. Mitel Fixed this problem with Firmware 1.4.0.77 Problem already Fixed

Hi to All, I've already installed the Last AACC (Ex Symposium) version 7.0.3 in SIP Mode Unfortunaltely the Installation dosn't work because the documentation doesn't explain how to configure the Roles. (Application Server, IIS etc.) Does Anyone have the same problem ? Best Regards

Hi to All, I want to have a little Delay on Hang-up with an Analog Phone configured with Auto Dial on Hang-UP My Phone is configured like This LD 10 : CLS EHTA FTR HOT D 4 <Number> (To have the call placed directly at Hang-Up I have see 2 Prompt in LD 15 (Inthe TIMER_DATA), but it doesn't...

Thanks a lot kwbMitel ! Yes I know that the 802.1x is a security protocol. But the mechanism whixh is already in place is that: - When the PC connected is recognized from the Radius-Server: It will be have a DATA 10.20.x.y IP address - When the PC connected is NOT recognized from the...

I've Try to connect new phone 6920IP on my MiVoice Business Express. Phone is already functionning (Release 8) but he cannot apply the 802.1x protocol to find the good VLAN to Boot in For information, it's already functionning weel with 5312IP Phones. I mean there is a Firmware problem ...

Thanks Billz66 ! It's Running Weel * Enable the System Security Management : Phone Administrator Passcode (Release 8) * Enable / Disable the web access via ESM Maintenance Command: As you said • pd send <extension> enable_web • pd send <extension> disable_web * Access the Phone via http://<Phone...

Many Thanks Billz66, I will try this asap but not at office tomorrow... And let you know [smile] Many Thanks to kwbMitel, But it wasn't my problem I'm already aware that there is a new "parameter" in the security options to enter in the Phone Advanced Menu In fact, you must give a password to...

Hi to All, I have already some phone 6920IP and 6940IP configure in MiNet with MiVoice Business System Release 8.0 SP3 PR1. Unfortunately, I cannot access with web with IP from the phone as described in the documentation. https://<IP From Phone> My Colleagues said that there is automatically...

Sure, I've spend a lot of time on this problem. The CallPilot solution is very simply. Thanks to you

Many Thanks to you yyrkroon ! It's working well [thumbsup2] The solution is OK with Adding the 10 Digits (French Numbering Plan)Number into the Extension DN 2: From the Callpilot Voicemailbox 4268. Do you know if I can suppress the D Channel Message from the Provider ? Or this is in the frame...

I have a problem to ROUTE CALL with Avaya Call Center 6.3 to a Mailbox (Connected with CS1k Release 7.50Q); I will Develop 1. Case which the system respond correctly: When I call directly a DID Number xxxxxx4499 on my Phone system, the AACC receive the call and at the End of the Script, the...