Search results for query: *

Hi, Anyone here have try to connect the Hipath 4000 V5 to Audiocodes Mediant 1000B via E1 (DIUT2)? Audiocodes will be use to enable the call capabilities of Microsoft Lync to dial out via PSTN of Hipath. Thanks in advance

Hi, I have deactivate and activate the SELS but still no raw data is dumping. Please see below configuration, DIS-LSSM; H500: AMO LSSM STARTED +=========================================================================+ | STATE OF LAN - CHANNELS...

Hi, Sorry for late reply I have tried to change the port settings to 1202 but still raw data is not dumping. But when i try to make a command via that 1202 port it is working. Do i need to configure something? Many Thanks

Thanks for your reply. I have try to change the cdr port to 1202 but there is no cdr being captured on the hyperterminal. I was able to do a command in hipath using this port but cdr is not dumping. Below is the configuration of cdr. <dis-sels SELGRNO = 1; DIS-SELS:1; H500: AMO SELS...

Hi, Need help on how can i disable alarms in hipath 4000 from logging in the cdr capture in service/ atlantic port? Thanks in advance Hipath0514

Need help on how to permanently lock the headset key in the phone where this button cannot be disable by the agent so that auto answer will works. OPENSTAGE PHONES BOTH IP HFA/TDM STANDARD 87 FOR STD 87: OUTBOUND> NAME>KEY15 HOLD>LINE> KEY16 | | | 1 SPKR 2 VACANT 3 VACANT...

Hi, Optiset E phones are not supported in HiPath 1100 system. Only Optipoint 500 and Openstage 15T are supported but in order to use this phone you need to install a UpOe card for this to work. Hope this answers your quesry Thanks

Hi, Try to isolate on the power supply. If you have spare power supply try to replace it.

Hi, Did you install the license of the ACWIN first before you install the software?

Hello, What system is this connected and what is the version of your xpression? Thanks

Hello Iamnothere, I have configured a SIP extension in my HG card with an extension 9676 and 9677. What parameters in the Mediatrix do i need to fill in in order to configure this two extensions? Thanks

Thanks for all your help.. Maybe i will do the command you said during off peak hours in a call center environment. We are a call center company that is why it is not allowed to make any changes which have an effect in the voice communication. Thank you verym much

If Mediatrix 4102S is not possible to connect to Hipath 4000 V5 HFA, Is it possible to connect to HiPath HG3500 SIP and configure two extension with it?

Hello, Here is the configuration of my sbcsu, DIS-SBCSU:9676; H500: AMO SBCSU STARTED ----------------------------- USER DATA ---------------------------------------- STNO =9676 OPT =FPP COS1 =10 DPLN =0 MAINO =9676 CONN =SIP...

Hello, Need your help, I configure a Polycom SIP extension in HiPath 4000 V5. The polycom is now connected to hipath and I was able to make a call but my problem is this extension is not able to receive a call. Whenever we dial this sip polycom it did not push trough. I also try to configure...

Hello, Thank you very much for the detailed information. How about if I am going to connect the Mediatrix in HG3530 HFA? I am going to use the two extension in the mediatrix for the fax machine. Do i need to convert the mediatrix to be able to connect using hfa? Thank you

HI, I need help on configuring Mediatrix 4102S to connect in H4K v5 system. Can anyone help me on the procedure? What tool do i need to manage the mediatrix? Thank you

Hi, Thanks for your help.. What if my access code is 823-X? Do i need to change this to 823-W-3-XXXXXX or 823-W-XXXXXX? The number 3002442 is the one that I dialled. Thanks again

Please also dont forget to do a regen for the AMO SA,AUN,PERSI and other AMO that you think the extension is included.

You must first REG-SBCSU:9602; (9602 is the subcriber number) Output of your command is same below, ADD-SBCSU:9602,OPTI,IP2,1-4-8-12, OPTIIP,1, 10,10,13,13,1,1,0,0,N,0,0,,, N,0,60,N...