Search results for query: *

Calling from AVAYA ext 240 to CUCM ext 8001 and it is fine. Where could be the problem? 3447105mS SIP Tx: TCP 192.168.1.160:5060 -> 192.168.1.244:5060 OPTIONS sip:Unknown@192.168.1.244 SIP/2.0 Via: SIP/2.0/TCP...

Ok here it is CUCM ext 8001 calling IP Office ext 240 trace log. I never use monitor so I didn't know what to filter. Sorry. UNICODE-UTF8 enu 2522104mS CMCallEvt: 0.1566.0 -1 BaseEP: NEW CMEndpoint f54c7538 TOTAL NOW=1 CALL_LIST=0 2522105mS SIP Tx: TCP 192.168.1.160:5060 ->...

http://www.2shared.com/document/lWG18WMo/Trace_log_2.html This is the log when I try calling from CUCM ext 8001 to IP Office ext 230. Sorry the IP Office version is 6.0 the Manager is V7.

I put on both sides 711ulaw codec.

The part of the log is here http://www.2shared.com/document/LT8SbK0_/Trace_log.html when I try calling from CUCM to IP Office. I even remove domain name but the problem is still there.

We have CUCM 8.5 in our lab (without Cisco Router as gateway) with few Cisco phones and our production IP PBX is IP Office 500 R7. I tried to configure SIP trunk between CUCM and IP Office using guide on https://devconnect.avaya.com/public/download/interop/CUCM8IPO7SIPtk.pdf. Calls from Avaya...

DTM.

I tried that and with no luck. I attached alarm for Trunk which is causing the problem (only thing is that nowhere says what card is? Just the assumption). I found on BCM documentation PRI DTM wiring but I am not clearly understood it. Could be the wiring problem although everything for PRI is...

Any help?

BCM 400 is 4.0.2.03 version. I saw somewhere on forum that people have more parameters to change. Do I have to update the system?http://i52.tinypic.com/fu3n7d.jpg

New info from provider: I have to define BNT 2 (B-number type, value 2 which is Unknown B-number type. They have on their side alarm LAYER 2 FAULT and following error: Frames received with a control field that is undefined or not implemented. Can I somewhere if the BCM sends some control field?

I don't know what else to change and where? I tried few things what they asked and without success. In the beginning the problem was on wiring and after they find the right combination alarm on trunk card was gone and dialing was enabled but like I said without establishing connection. Where can...

We have two PRI trunk cards on our BCM 400. We changed the telephony service provider for the second one. They gave us the group number ( its’s actually mobile provider) and with their tehnician I checked the parameters for trunk card . The problem is that we can’t establish connection. When I...

We have five Avaya ERS 4524 switches in the Redundant cascade stack configuration with MLTs configured on it. After powering off/on the stack the one switch member of the stack (not the base one) wasn't working. The stack reported that he is missing. We have the same switch for reserve and we...

I suppose I need advance licenses for both 5510 switches? Upgrading the switches I can try demo licenses for Cluster/SMLT. If I try with stack/DMLT scenario do I have to make some config changes on other devices? My only concern is when one of the switches in stack goes down will another one...

Hello, In attachment are the schemes of the current network state and our proposal for implementing redundant links with Cluster+SMLT technology. We want to create a redundant links (max 20)and get short failover time and the ability to keep the current versions of software (we are satisfied...

Anyone?Any idea?

We have internet bandwidth 4/4 Mbps on outside interface. To inside interface are coming few internal network. How to limit internet bandwith usage for let's say 10.1.103.0/24 network to use 512/512 kbps. We tried as shown below in config but without luck. If we create subinterfaces for each...