Search results for query: *

I'm receiving 4 digits from the provider and the users' extensions are those same 4 digits. I had him dial 2245 from another set to see if me adding that line worked. It's my first time doing anything on BCM. I understand the difference in DID and extensions I just don't know what I'm doing on...

Hi all, We're upgrading our AT&T circuit at a remote office. The plan is that we'll get a new temporary block of DIDs to which our real DID's will remote call forward to until they are ported a week later. Just found out this is happening Monday and it doesn't seem likely our vendor will be able...

Ah so that's how I find the release.. REQ iss VERSION 3521 RELEASE 4 ISSUE 50 W +

Thanks, I just tried, but when I hit spacebar after 96, I get: REQ: new TYPE: i2050 TN 96 SCH0122 TN *** OVL000 >err sch0122 > SCH0122 Loop out-of-range (0-159).

I have 8 left and 0 used.

Trying to add an i2050 for the first time at one of our sites and I don't know which TN I should use. I've set them up at our headquarters office, just not here and I don't think anyone ever has. I've gotten this far: When I ld 22, slt IP USERS 8 LEFT 8 USED 0...

prt the tnb and look at the key 00 line, for example: KEY 00 SCR 4734 0 MARP The 0 after the 4734 tells you the CLID table you're using. Then ld 21 prt clid will show you that clid table.

Thanks drifter. Yes we have other carrier T-1's and yes we're using one as the clocking source. I tried all different timing settings on the Asterisk all with the same results. It was recommended I use the ESS5 switch type in the asterisk-meridian setup document I used, so yes, that should be...

Here's some more of my config. I want to troubleshoot the most I can on the Nortel side first. Should my next step be to re-seat the MSDL card and a "force download". What does that do exactly? D-channel: ADAN DCH 4 CTYP MSDL DNUM 11 PORT 2 DES ASTERISK_VOIP USR PRI DCHL 4...

Trying to make an asterisk server talk to my nortel and having a hard time determining what sides to blame. The d-channel on this loop (loop 4) alternates between RLS and AEST. Soon after disabling the d-channel and the loop, re-enabling and an rcnt, I get: .lcnt 4 PRI LOOP 4 TRSH CNT: BPV...

Hello, I need some assurance that I'm properly understanding this concept. We have a TIE trunk between offices using 12 SIP trunk licenses. We're currently routing a third of the calls from site A to site B over this trunk, using DSC's. The other 2/3 is over PSTN incurring ld charges. I've only...