Search results for query: *

Hello, I am being asked to allow TEHO from the company's Cisco PBX in Australia using the existing H.323 trunks.For testing,a route in the Cisco switch has been set up to send the last 11 digits,(1419.819.xxxx) however when I do a list trace on the TAC, I'm only getting the first four digits...

Great, thanks very much !

Hello, I have an S8720 R3.1 that has a G700 linked over the WAN. We want to measure bandwidth usage. What IP address should be used...the media gateway or the C-lan ? Or how should we measure? Thanks

Well Merlinman, I've read other posts where you said, "It almost never the processor"....and you're right ! This proved to be not the processor, but a flakey surge protector/power strip that was driving the switch crazy. Once the protector was replaced, everything settled down!

Well, the processor at the main site was losing it's mind, and it also lost the T-1 tie-line translations. I replaced the processor and put the T-1 translations back in now all is well !

I got pulled into a problem with two Legends that are connected via a PTP T1 circuit. The main site is a 6.1 Legend and the remote site is a 7.0 Legend. The legends are set up with UDP, but are set up as tie lines...no PRI programming. They have been working for a year without problems, but...

98Converter, I have already tried using the domain name with no luck. I'm about ready to give up and wait for the MM to be upgraded so I can get some tier 3 support. Thanks for the reply!

Bruce, Thanks for the reply. We are running Notes 6.5.6 I can get voice mails to come into the notes mail box, but the Notes data base won't link up with the MSS. When I input the MSS IP address from the data base, I get an error message from the MM saying "invalid login". Any idea's why?? I...

Hello, We are currently running R3.0 Mod Msg with MSS and using the web client. Management is looking at rolling out Lotus Notes thick client. ( we use Lotus Notes for email) I seem to recall reading that the Lotus Notes thick client doesn't play nice with R3.0 MM Does anyone have experience...

Thanks for the reply. No, I'm not currently using the ICHT. When I put up the change command for the ICHT and the trunk group, the service field is greyed out and says "tie", which I think is telling me I can't use ICH for tie trunks.

Hello, I am being ask to set up tail end hop off on our S8720 R13.5 The problem, as I see it, is the calls will be coming in on a ISDN T1 with the service type as "Tie". I'm thinking the incoming call handling table won't allow me to set up tandem calling with the tie service type. Am I wrong...

Kevin, Thanks for you reply. Yes, we have setup the public-unknown tables in both switches, but I need to check on the ISDN tandem settings. Thanks very much for that information ! Jim

Hello, I have two remote Definity G3VS R6 PBX's linked to a main site with ISDN PRI T1 service.(DCS+) The main site is a G3si R6 with ISDN trunks to Verizon. I can't get caller ID to work outbound from the remote sites. Inbound caller ID to the remote sites is ok. Outbound and inbound caller...