Search results for query: *

1 more thing.... here's what my ip address and gateway ipv4 172.16.10.22 mask 255.255.255.0 default gateway 76.185.160.1 <<<<<------------ so it's using the gateway if the isp.

it's working and blow is the config. one thing though, I get error when do --ip route 0.0.0.0 0.0.0.0 76.185.174.189 (isp ip) the error said invalid hop and the ip is this router. thanks all for helping. ! ip name-server 4.2.2.2 ip dhcp excluded-address 172.16.10.1 172.16.10.21 ! ip dhcp...

thanks for all the responses. i'll try them out tonight and update the outcome.

I can remove ip nat inside source list 1 interface FastEthernet0/0 overload and worry about access-list later. 76.185.174.189 is the ip got from isp. If I were to connect my pc directly to the ips router (bypass my router) i get 76.185.174.189/19 and gateway is 76.185.x.x 76.185.174.189 is...

Hi, I am trying to config a router that sits behind my ISP. from the router, I can hit the outside world. however, I can't hit the outside world from LAN side. I also can't hit the LAN (172.16.10.22 a pc that connects to int fas0/1) I get error when add 0.0.0.0 0.0.0.0 76.185.174.189...

Hi, I am trying to use cca to config a Cisco 3500 series switch. I odd thing is that telnet works just fine. I got a login name and password and again, that same login worked when telnet in. when I try login using cisco config assistatn(cca), it's prompted for a login and that same login...

no luck, ip name-server 4.2.2.2 ! ip dhcp pool inside import all network 172.16.10.0 255.255.255.0 default-router 172.16.10.1 dns-server 4.2.2.2 ! ! bridge irb ! ! interface Loopback1 ip address 172.16.100.1 255.255.255.0 ip nat inside ! interface FastEthernet0/0 ip address...

so I make fa0/1 network 172.16.10.1 but that network is not talking to the outside world still. ip name-server 4.2.2.2 ! ip dhcp pool inside import all network 172.16.10.0 255.255.255.0 default-router 172.16.10.1 dns-server 4.2.2.2 ! ! bridge irb ! ! interface Loopback1 ip...

instead of bridging, I try loopback and now the two networks are talking but 172.16.100.1 is not talking to the outside world. see below... ip name-server 4.2.2.2 ! ip dhcp pool inside import all network 172.16.100.0 255.255.255.0 default-router 172.16.100.1 dns-server 4.2.2.2 ! ...

Minue, yes the router is behind a Verizon modem. the idea is pointing all traffic to fa0/0 and fa0/0 is also a gateway for 172.16.1.1 network. you are correct, I can just use one of the other interface but that would make it on the same 192.168.1.1 network and I don't want that. I want the...

no luck ip name-server 4.2.2.2 ! ip dhcp pool inside import all network 172.16.1.0 255.255.255.0 default-router 172.16.1.1 dns-server 4.2.2.2 ! ! bridge irb ! ! interface FastEthernet0/0 ip address 192.168.1.10 255.255.255.0 ip nat outside duplex auto speed auto ! interface...

for some reason, the 172.16.1.1 is not talking to 192.168.1.1. I can't setup virtual interface vlans on the router so I am setting up bridge instead. however, the two networks are not talking. I can ping yahoo.com from 192.168.1.1 but cannot from 172.16.1.1. I also cannot ping 172.16.1.1 from...

Hi, anyone know if there's a way I can change the default voice vlan to 1 or vice versa? thanks,

no luck. try erase config and restore and nothing works. it keep saying " no load specified" i check the uc520 and the file is there. why is the phone not picking up the file?

I have tried switching ports and those ports are configure right. I know that because the phones that are working will get that "loads file" when unplug and re-plugs. the phones that aren't working have not been used for sometime. the config file is about 400 pages, I don't think anyone would...

hi, we have a uc520 using cme and the problem is some 7960 phones cannot get the load file from the tftp server (the uc520). the phones are connected to poe switches. I've tried plugs the phone directly to the uc520 but still no luck. the phone just going through the "ip configuration" cycle...

I tried the "break key sequence" again, again and again...again, and it worked. omg, many thanksssssssssssssssssssssss!!!!!!!!!!!

thanks Ciscoguy33 but I've already tried the "break key sequence" and it didn't work. I just can't tell which is the NVRAM chip. do you know the label on it? also, if I buy a pcmcia flash card, how does it works? does it work like a bootable pc image disc, where you can just wipe everything...

first, I like to thanks Burt for helping. so I opened the box and can't tell which is the NVRAM chip. there are actually two fans and four chips that appear to be detachable but none near to the fans. also, I can't get the step 1 going ..."#erase start" your note shown the "#" prompt and mine...

hi, anyone know how to reset the cisco 3600 router back to manufacture default settings or reset the password being that the password recovery is disabled? here's the ISO version: System Bootstrap, Version 11.1(17)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2) Copyright (c) 1998 by cisco...