Search results for query: *

I have one of these display phones and was wondering if it will work? I do not see that phone type in the site administrator however, not sure if another phone type will work as an alternative.

still not blocking the calls. For all the 809 ARS entries I have them set to deny, call types are all set to intl.

CORERECTION: So I went back into ARS Analysis and created one for 1809, 7,10,11 min max route all are set to deny and call type is set to intl, did the same for 809, and I can still place the call.

ok here it is: Dialed String - 1809555 Total - min 11 max 11 Route pattern 1 call type fnpa location - all So if I understand this right then it should be the call type? So I went back into ARS Analysis and created one for 1089, 7,10,11 min max route all are set to deny and call type is set...

So here is an interesting discovery (maybe not new to you) From my phone system I can dial 1-809-555-1212 which is the dominican republic. I've checked and rechecked my ARS Analysis and I have it listed multiple times with and without the 1 in front, with 7, 10, 11 digits - all set to deny with...

Yes I thought so as well, just thought I would ask the experts. Thanks everyone.

I have a VS 19" monitor that drops video after 10-15 seconds, I've tested this on 3 systems and the issues follow along to each (servers on a KVM, and 2 laptop systems) I have checked and lowered resolution along with refresh rates etc. Any ideas other than toss it?

Thanks - I've reviewed your link references and see it is pointing to an upgrade which results in the Flash drive failing. Now would that not result in the system failing 100%? We are operational – we just can not connect to the system, Also we did not modify our system in any way prior to...

I should add that the system clock reset to EST + 5 hours when this all started.

Mitch I have an s8400 system and can not log into it either direct on the server or remote using SA software. I can though log into my VM system without issue (separate server) when I try to connect from SA with GEDI I get a communications error: No Ports available, I can ping IP address...