Search results for query: *

I think you're correct on the 39xx phones. You can change numbers at the phone. My challenge are the 26xx's. They are the vast majority.

I should have been clearer. Setting up AutoDial on individual lines on a Nortel CS1000 system. Meridian phones - mixture of 2008, 2016, 3903, 3904. Again, I can set up the AutoDial fine but the pauses don't seem to pause correctly.

Hi Wanting to set up a Speed Dial. I've done it many times before as an ADL and had no issues. I need to create a pause after the dialed number and then have a 4-digit code automatically dialed. Seemed I used to be able to do this with a "**" but that doesn't seem to work now. Any insights...

That did it. Thanks!

DES NAT TN 011 0 00 08 TYPE 3903 CDEN 8D CUST 0 FDN 7000 TGAR 0 LDN 1 NCOS 5 SGRP 0 RNPG 17 SCI 0 SSU LNRS 16 XLST CLS CTD FBA WTA LPR PUA MTD FNA HTA ADD HFA GRLD CRPD STSD MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1 POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA CFTD SFA...

3903 phone delivers this prompt when called and line is busy. There is a second line on the phone. LHK is 1. Everything else appears to be in order. Any thoughts? Thanks.

Thanks Wanebo. I tried that and it seems it may have cleared up the issue. Appreciate it.

Hi. Our system is no longed indicating incoming messages or clearing the indicator light when messages have been listened to. I assume it is some sort of MWI failure, I have rebooted the server but this does not clear the problem. Would welcome any thoughts or suggestions? Thank you!

Greetings. We are in the process of evaluating how many lines we need in our building. Considering dropping 1 of our three PRI's. I'm looking for a software that I can monitor call usage for a few weeks. Any suggestions would be much helpful. Thanks in advance.

Hi. Trying to create a scenario where the ringer is silent but the indicator light still flashes when receiving a call. When I use SCN, this kills the light as well. I've lowered the volume the software as low as I can. Any thoughts? Thanks.

Hi. We are still operating an older Meridian system with an m2250 console. It is having continuing aging issues and could certainly be replaced by a smaller, more functional unit. My cohort here and I seem to remember that it has to be on the PBX for the system to operate? Can anyone shine...

Here is some more info TYPE RDB CUST 00 DMOD ROUT 40 DES MUS TKTP MUS NPID_TBL_NUM 0 VTRK NO NODE ICOG OGT SRCH LIN STEP BDCT NO ACOD 2014 TARG 01 CLEN 1 OABS TIMR ICF 512 OGF 512 EOD 13952 DSI 34944 NRD 10112 DDL 70 ODT 4096...

Hi, Looking for a suggestion on how to have two different Music On Holds within our building. One would go to certain phones. The other source would go to others. Here is a printout from our PBX: DES MUS TN 020 0 00 01 TYPE MUS CUST 0 XTRK XUT TIMP 600 BIMP 600 RTMB 40 1 CFLP 30 DATE...

I have. Tried both options in options menu. Tried a couple different headsets as well.

Hi. Put a 3904 into service with the excess purpose to use an external wired headset. The Plantronics headset I've been using with 3903's and having no issues. Unfortunately, with the 3904, it keeps disconnecting itself. I have reseeded it and even tried a couple of identical headset. Is...

The firmware issue was it. Did fdlu in ld 32 and now they are all the same. Thanks for all of your help.

Hi. Setting up a number of 3903 phones. All of the TNs were copied from the same TN. The problem is some of them have the Transfer soft key and some do not. The displays have different keys highlighted, some Transfer on soft key one, some have Forward. They are in the same key positions in...

Is there a way to call transfer on a 500 series analog phone? This would be for multiple phones to be used repeatedly in a fundraising setup. Thanks as always.

All local calls (either area code) will now require a 10 digit dial. Our PBX is set at 7. I'm sorry I was not more descriptive.

Hi, AT&T is adding a new area code (629) over our present one (615) starting March 28. I tried to add the new area code in ld 90 but I get an error (ESN072). I also need to get our system to allow 10 digit dialing. Not sure where to begin on that one. As always, I appreciate any help...