Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. ahmedmid

    Change Phone Type

    You can export the backup with Bulk Administrator and the default location of it is C:\Backup and stored files like this Backup11-26-08#2-03.tar.
  2. ahmedmid

    Route Pattern Question

    Can any one explain to me what the wild card " @ " exactly do? I read the cisco help but I don't understand it well. This is the explaination of cisco "The route pattern 9.@ routes or blocks all numbers that the NANP recognizes. The following route patterns examples show NANP numbers that the...
  3. ahmedmid

    Gateway Problem

    I tried to change the FXO port but it is the same at all ports and I'm sure that all connection is right and grounded well.
  4. ahmedmid

    Gateway Problem

    The calls get directly, and the FXS is working fine with the internal calls but the problem with the external calls only. Is this can be problem with the C.O. ?
  5. ahmedmid

    Gateway Problem

    It works on cisco 2821 router with 4 Voice FXO interfaces and 2 Voice FXS interfaces. It Works with MGCP. and I work on Cisco Unified CallManager.and the FXO works with GS(Ground Start) Ports. do you want any other details.
  6. ahmedmid

    Gateway Problem

    Hi guys, I have a problem with one of my gateways. It is a strange problem appeared recently and I hope if any one face this problem to tell me how he solve it. The problem in steps like this : 1- The customer call the gateway from an external number. 2- He hear a dial tone. 3- At the FXS site...
  7. ahmedmid

    Hunt Pilot Name

    I made a hunt pilot for a group of users , it works fine but I wanna show only the name of the group if any user call this group or any member of the group call any user. It now show the first name of the group and if any member of the group pickup the call then it shows his name.I want only...
  8. ahmedmid

    Finding unused extensions\voicemail boxes

    Do you mean old extensions that not used at all? If so you simply can search in the call manager by part of number. For Example : if your extensions begin with 6000, just write in the search 60 and it will get you all the extensions begin with 60 and follow the number until you find the series...
  9. ahmedmid

    Voicemail Only Extension

    CTI Port is an excellent Solution I was going to advise you to create a device profile and Forward it to voice mail but CTI port is better and for the voice message , Dan soluion is perfect also
  10. ahmedmid

    Hunt Group

    Thank you Riktov Your Solution was perfect The problem with me that I mixed between Hunt group in the Service -> Cisco Unified CM Attendant Console -> Hunt Group and the Hunt Pilot so when I tried to do it I found strange things But when I did your solution, Everything became clear to me...
  11. ahmedmid

    Hunt Group

    I work on Cisco Unified CallManager 4.2 and want to make a number that any one call it , it ring on a group of users I don't want to make Forward no answer or something like this Also don't want PickUp group I found Hunt group and Pilot point . Is this solve my issue and if right how can I...

Part and Inventory Search

Back
Top