Search results for query: *

Thanks for that. Card number is QPC659C - dos that tell you much? (Clearly, I know bugger all about Nortels). Tech has already tried the ENLS for the shelf, no help. Tech says he is can't disable any card in the shelf - PABX says card disabled, but card LED does not go out (same for all cards...

Client site has a number of extns dead, tech at site suspects the Peripheral Buffer card is shot. The tech has identified the card as DLBFR - is this correct? And what does the DLBFR card do, anyway? --------------------------- Murphy's Law, variant 315: "A short-cut is the longest distance...

Thanks - figured it out using BLEQI, FIMOE, FIFTI, FIMOI, BLEQE on both SYSSUBFSs. FIFTI reported errors on SYSSUBFS11 and fixed them, all appears OK to this point (customer hasn't reported any alarms since). --------------------------- Murphy's Law, variant 315: "A short-cut is the longest...

G'Day from Oz! :) I have a problem with a customer's BC9 MD110: the auto-dump (via DUFQI) keeps failing. When I attempt to force a manual dump (using DUSYI:DUMP=ALL,PRINT=ALL;) the dump goes through to the CHECK READING OF RELOAD DIRECTORY stage, then stalls and the IPU resets, logging me off...

I didn't think that would make that much difference...obviously it does. :-/ Australia. --------------------------- Murphy's Law, variant 315: "A short-cut is the longest distance between 2 points".

Hi all. I know that BC9 can forward to external destinations via speed dial if it has the correct patch. How do I find out if the system in question has the correct patch? Where do I look & what am I looking for? Thx in advance... --------------------------- Murphy's Law, variant 315: "A...

I need a door station-type device that will meet the following needs: * PoE (Powered of Ethernet) * SIP * small & platic preferred (cost is a factor, and device will only be used indoors, anyway) * able to be integrated into a PABX as an equipped end * minimum buttons (we don't want users...

Darn...need and edit feature. :) To change the SERV in your ROCAP, use the following (I'll be making several assumptions in my SERV, here, D8 is the 3rd last digit in my SERV): ROCAC:ROU=60,SERV=3100000101; This will, among other things, unconditionally block outbound CLI in ROU=60. Murphy's...

There are two levels to braodcasting outbound CLI: the ADC of the individual extn(s), and the ADC of the outbound route(s). Where the route permits extn-level CLI to be sent, the extn settings will override; if the route blocks outbound CLI, extn settings don't matter. In the extn settings, you...

I'm going to make a couple of assumptions, here: 1) that your DDI range is 33-73xx 2) that your extn range is 73xx The tricky part, from your NUTRP, is the formatting was lost in posting. Oh, well. Execute command: NUTRI:entry=33,cnvtyp=2,numtyp=0,trc=2; However, if you have your indial...