Search results for query: *

SMURF!!!!!!!!!! If you had rung me I could have told you thats what we have had to do at NY :)

Yeah, after reading your post I was going to do that...but at the end of the day...shouldnt have to. I have already e-mailed the guy from ebay and told him. Nick

Very well spotted!!!!!!!! The weird thing is, that I didnt use a company in China, it was from EBAY, but from a company in Slough..........wait till I write his feedback.....thanks for this.

Yep thats correct and the router coudl ping the laptop, it appears to an interoperability issue between the e0 interfaces Here is the sh int info sh int e0 Ethernet0 is up, line protocol is up Hardware is PQUICC Ethernet, address is 0004.dc0c.b55b (bia 0004.dc0c.b55b) Internet address is...

heres the info you requested Burt....and thanks for your help PC A- 192.168.2.10 Router (Function _room) F/E0 192.168.2.3 & E0 192.168.100.2 PC B- 192.168.1.10 Router (Wheatsheaf_Pub) F/E0 192.168.1.1 & E0 192.168.100.1 PC A can ping router function room (F/E0) and vice versa PC B can...

Wheatsheaf_Pub#sh cdp nei det ------------------------- Device ID: Function_Room Entry address(es): IP address: 192.168.100.2 Platform: cisco 1721, Capabilities: Router Interface: Ethernet0, Port ID (outgoing port): Ethernet0 Holdtime : 168 sec Version : Cisco Internetwork Operating System...

Function_Room#sh ip int bri Interface IP-Address OK? Method Status Prot ocol FastEthernet0 192.168.2.3 YES NVRAM up up Ethernet0 192.168.100.2 YES NVRAM up up Function_Room#sh ip...

Hi Burt, I am 100% confident the cable is ok, I have already tested this, and the wic-1enet only operates at 10 mpbs so there is no speed command applicable to it

sh run Building configuration... Current configuration : 778 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Wheatsheaf_Pub ! ! ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 192.168.1.1...

Could this explain why I am not able to get this to work MPC860P processor: part number 5, mask 2 Bridging software.

No, I know the difference between a straight through and a cross-over :)like I said the interface and line protocol for both routers are up

Sorry about that burtsbees, here is what you requested. Wheatsheaf_Pub#ping Protocol [ip]: Target IP address: 192.168.100.2 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: ethernet0 Type of service [0]: Set DF bit in IP...

Removed the route and still no joy, here is the ping results TO OTHER ROUTERS DIRCETLY CONNECTED INTERFACE Wheatsheaf_Pub#ping 192.168.100.2 repeat 10 Type escape sequence to abort. Sending 10, 100-byte ICMP Echos to 192.168.100.2, timeout is 2 seconds: .......... Success rate is 0 percent...

Yeah, I have a cross-over between them, the interfaces are up and LINK light active

Hi everyone, I would really appreciate some help here, on something which I am sure is very basic, but nevertheless I am banging my head against a brick wall. I have 2 x 1721's both runnning IOS 12.3(1a) with WIC-1ENET modules in slot 0, I am trying to route between the two interfaces, but...