Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. phoneman429

    Grandstream with MiVB

    We've been using them for years, the HT-502 & 503 required 3 settings and was live, the 16, 24, 48 ports have a little bit more of a set up, but for generic analog, they work great, the hospitality deployments can require some tweaking regarding MWI, both locations had 3rd party VM, but other...
  2. phoneman429

    AT&T SIP won't ring multiline appearences

    While prime is in use AT&T SIP won't ring multiline appearences, call reroutes on busy to VM, can internally ring multilines when prime is in use.
  3. phoneman429

    adding an account code on UC 360

    We had to upgrade the UC360 (1.1) and the 3300 to 6.0SP3 (12.0.3.15)from SP1 to correct the issue.
  4. phoneman429

    Audiocodes FXS on HX5000

    I have search those and they reference trunkside only with the 5000 or configurations for the 3300, we have a MP-118 bringing some POTS lines into the system, datanet or KB articles can't provide any info for using the FXS ports in the device, its a shame they have to buy something else to break...
  5. phoneman429

    Audiocodes FXS on HX5000

    Has anybody been able to get one of these to work, there's no KB articles on station side, trial & error is getting me nowhere.
  6. phoneman429

    mitel 3300 ICP long delay on outgoing call

    Check your limited wait for dialtone timer in circuit descriptor, the trunk will wait that long for dialtone before outpulsing regardless of whetehr or not it receives it, also your interdigit timer can play into this depending on how ARS is written, kwbMitel's suggestion will show you how long...
  7. phoneman429

    Extend a POTS to HX5000 with HT503

    We have done this with Audiocodes and KB articles with no problem, used the HT502 to HT503 to extend a fax in outbuilding with no wired infrastructure, was a piece of cake with HT documentation, with HT503 being third the cost, it seemed like an even better solution for the 5000 needing 1 C.O...
  8. phoneman429

    Comshare 750

    Unfortunately not, I failed to proof read my posting before submitting, but I'm looking for the manual on its predecessor, the Comshare 750, I don’t recall the codes aren't the same, if they are, this one is bad. The unit looks brand new and I saw the inop "Stick" it replaced, but if my...
  9. phoneman429

    Comshare 750

    Does anybody have a user guide or can forward the codes for the various ports, the codes for the Comswitch 7500 don't work and on top of that they've shut their doors, I haven't touched one of them in 10+ years, I tried all the codes I could think of, nothing worked, any help will be greatly...
  10. phoneman429

    UCA 4.0 - User Accounts and PRG problem

    The UCA has to synchronoize the EHDU's from the PBX to know about them, there is an option on the PBX sync page to sync dynamic extensions only, then once it has successfully sync'ed it should show up under the account as an EHDU, it must be configured 10 digits as well.
  11. phoneman429

    UC Advanced

    We have it running without an issue, we had the BES before UCA, I didn't do anything with our IT guy that manages the BES either. The UCA is only an internal FQDN, you cannot get to it from the internet and the app works great. I was having issues originally when my password had a capital letter...
  12. phoneman429

    Mitel External Hot Desk

    I don't know if ISDN 30 is the problem having 2 "control" channels, but trying enabling answer confirmation, it's required for POTS, and we had an issue where the desk set would only ring once with our PRI (23B+D), apparently the wireless providor made the PBX think the call was answered and...
  13. phoneman429

    MXe Server for ISS - Deployment Information Desired

    Guys, I certainly appreciate the input, but the ISS is being deployed with the 9 controllers for trunking gateways, resiliency, etc. This job was engineered by Mitel, the MCD for MXe Servers Rel. 4.0 I&M Update shows the same with the now discontinued MXe Server (on page 4), which is being...
  14. phoneman429

    MXe Server for ISS - Deployment Information Desired

    No SIP trunks here, were deploying 2 MXe's with 4 PRI's each, and 7 CXi's with POTS lines for survivabilty and resilience of 2000 users across all 9, no OPS and this has been engineered with/by Mitel. The same engineer said the server-manager will give me an interface to manage everything, but...
  15. phoneman429

    MXe Server for ISS - Deployment Information Desired

    Not really, all the documentation states this puppy is IP only, it states what forms aren't available as a result, I have (9) controllers that will be added, (2) as trunking gateways and (7) as survivable branches. Do I administer these like OPS and they're just (9)stand alone PBX's to manage...
  16. phoneman429

    MXe Server for ISS - Deployment Information Desired

    I've taken evry test I can find, our AE has pointed me to all the docs, none get beyond installing the MSL & the blade.
  17. phoneman429

    Caller ID on analog sets through SX-200 Peripheral Bays on Mitel 3300

    The only card the ever upgrades (in per bays) is the BCC III, to review the firmware you'll have to remove the card and review the label on the back side with the rev level, the firm plid command doesn't work on 200 bays with the exception of the BCC, 2K per nodes list everything in the cabinet...
  18. phoneman429

    3300 MCD 4.0 networking 3 switches via IP trunking

    I have to side with Slapin, I have a customer with 13 sites connected via frame relay, I have 4 LX controllers (not MCD capable) as A.A.'s and IP gateways for the sites with 2K's and I have 9 MXE's stand alone, the IP/Xnet forms and ARS is all it takes, most of it is simple and straight forward...
  19. phoneman429

    MXe Server for ISS - Deployment Information Desired

    Has anybody deployed one yet? We've sold our first one, I've been through all the testing, but can't figure out how to manage any PBX features/functionality, we won't have the server itself until around the 18th of January, I'm trying to see how to integrate the 3300's with the server so I don't...
  20. phoneman429

    Caller ID on analog sets through SX-200 Peripheral Bays on Mitel 3300

    What's the differences between the analog cards for the extensions that do work vs. the ones that don't work correctly? Are they the same part number, I suspect there may be firmware version differences/issues between the ONS cards themselves, try swapping the cards to see if the problem is the...

Part and Inventory Search

Back
Top