Hi all,
I have one of BES 110 when i tried to run it, it gives me this massage :
Booting...
Testing main memory - PASSED
Starting..
Business Ethernet Switch BES110-24T
Boot Version 1.0.0.4 Wed Jan 17 15:13:18 2007
Hardware Rev: 03
Resets: 4
Initializing Flash..
Reading MAC...
Hi DaddyOfThree,
i have ERS-8300 SW.4.03 on the core and ERS-2500 SW.4.2 on the edge,Could you tell me how to do the bouncing of the IST link? please, thank again for your help.
best regards.
yes i am, when i disconnect one of the fiber link (up link) it works, i run an smlt on my network. is there any reason for that?!!(note the server of these sales point is connect directly to one of the cores)
Hi all,
i have this odd problem, i have multiple sale-points connected to the same switch 1 is working and the other 2 does not when i connected these 2 directly to the core they worked!!!, but in the edge switch they did not,although the 3 sale-point have the same port configuration and work...
Hi all,
i used to use ERS 2500 switches with licensing stack to make a stack of 2500 switches, and that work fine.
but i get some new switches from nortel with stack factory enabled feature, when i log in to the switch and try to change the mode of rare ports to stack mode, it return to stand...
Hi all,
thanks for your help, but the problem was not from switch the IP phone was missing some necessary parameters.
and yes V4.2 on ERS 2500 support ADAC and work quit good.
best regards.
Hi all,
I was configuring the ADAC option for some site, i have ERS 2500 V4.2 on the edge, and 8300 on the core, I do the configuration as the following:
Operation Mode? UntaggedFrameAdvance , voice vlan (70 which is the IP Phone Vlan), the uplink port is the trunk port from the edge to core...
Hi all,
i know this section is for Nortel but Trapeze MX-200R is exactly like Nortel WSS 2382,so my question is how i can make hidden SSID that does not appear on radio scanning?
thanks.
Hi all,
i think a found the solution.
i should chang the DM used from Edit->Preferences->General
then change the device manger from bundled to the path of new one DM .
best regards
Hi all,
i have both the latest ESM v6.2 and the JDM v6.16 the ESM came with its own JDM which is v6.09,
i want the ESM to lunch JDM i installed which is v.6.61 because of the new image of the ERS 2500 v4.2,
My question is how to do so, if there is any one tried to do this? please any help...
Hi all,
I have a WSS 2380 want to update it for the recent SW image,
my question is does the images for the 2382 compatible with the older HW 2380? and what is the recent SW version ?, i search at the nortel web site and only found one file NT804114.rel is it the right file ?,I do not find any...
thank you biv343 for this help.
but one last thing should i backup each switch a lone in a stack, or i can put all the stack in one config.cfg file ?!
and thank you all.
best regards.
Hi all,
i have a 2 questions,
What is the right CLI command to perform fast start-up for ports in the 2500 switch?, i tried the one used in both 470 and the 5500 it give invalid value
please need your help if any one know the right command because doing that for a 50 switch using JDM is a night...
i use the IST and SMLT, no the edge switch is just layer 2,
the network is about 8 month installed, the version of software is the same one chipped with, and another thing the network is running as flat for the time being.
Hi all,
i 2x8300 at the core and stack of 4 5510 on the edges when t connect a lap top with a static ip to one of the edges it works fine, but when remove it and connect it to other edge it does not work and i can't ping it, i check the ARP table in the first edge i still see it there. a delete...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.