Search results for query: *

Does anyone have a Nortel CS1000 connected to an ESNA voicemail system?

Can a Dual Port PRI -NT5D12AG card be used for an E1 (30 B-channels and a Dch)?

Can the AC1 code be changed from 8 to #9 on an Option 11 ?

We have an issue with only one phone where when the user listens to her message and the message light will not go out.Have added a key to the phone so user can manually turn off the light but looking for a fix so she doesn't have to manually turn light off. This is a Nortel Option 11 using an...

We have an issue with only one phone where when the user listens to her message and the message light will not go out.Have added a key to the phone so user can manually turn off the light but looking for a fix so she doesn't have to manually turn light off. This is a Nortel Option 11 using an...

Regarding the RNPG fuction (i know who is still using this feature)If you have 3 or so digital stations that are all part of the same pickup group will the RNPG feature work on any number that appears on the phones or is it only key 0. Thanks

Can anyone tell me the part number for the backup tape used on a CallPilot TRP600r ? Also do you know where they can be purchased? Thanks

Thank You 30n30w

Here is a printout of the SLT. Another question I have is what are the values in the SLT really telling me? For example it shows 296 Analog phones with 249 used and 47 left. However when I do a station count in LD 81 (listed below) it shows that there are 960 analog phone built 7 (500) and 953...

If a system has a total number of 32760 TN's can they be used for Analog phones, Digital Phones, or B -channels etc depending on the type of cards you have . Or is there only a certain amount available for each type?

We are getting static on some of the recordings and want to replace the Miran card

When replacing a Miran card is that somthing where the existing card is just swapped out like a digital line card or is there reprogramming that needs to be done?

Has anyone heard of this vulnerability within the Nortel environment. We got a notice regarding some Cisco phones and servers and need to find out if it is affecting Nortel as well. Belwo is a basic description of the issue. The Heartbleed Bug is a serious vulnerability in the popular OpenSSL...

ok thanks , do you have a URL for the ESPL website?

Thank you KCFLHRC .mdp issp VERSION 3621 RELEASE 6 ISSUE 00 R + DepList 1: core Issue: 02 (created: 2010-08-17 10:08:38 (est)) IN-SERVICE PEPS PAT# CR # PATCH REF # NAME DATE FILENAME SPECIN S 000 Q00350041-01 ISS1:1OF1 p16376_1 05/01/2013...

The system is a version 3621 using Release 6 Issue 00 R +

How do you tell if your PBX has up to date patches? I did the ISSP command in LD 22 to view the lsit but not sure how to find out if there are new patches available. Thanks

Is there a specific Key on the 2250 attendant console that could be causing the outgoing calls to go to the console instaed of going out the DID/DOD trunk group. All the T'1 are in service and idle. Incomming calls work fine but any attempt to send an outgoing call to this trunk group ends up...

TYPE RDB CUST 00 ROUT 0 DES BELL TKTP DID NPID_TBL_NUM 0 SAT NO RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC NI2 CBCR NO NCOS 2 SBN NO PNI 00001 NCNA YES NCRD YES CHTY BCH CPFXS YES CPUB OFF DAPC NO BCOT 0 INTC NO...

We tried dialing the acod for the route. I was expecting either a dial tone or a busy signal but the operator answered the call. I had them look at the attendant console and they said no keys are lit up. Below is how the console is set up. I also tried doing a trace on each of the conole keys...