Hi all I have a BCM50 with 6 doorphone on it.
The weird problem I face is that they work fine for about 5-10 minutes, then some of them began unreachable like there were busy. The monitor tell me they are not busy.. anyone face the same problem before?
Any suggestion is really appreciated...
You are right, the disply is small,
but I dont need date and time on my display.
I just want to see the DN!
feature+ *0 is ok but tricky for the customer
thank you
This is quite a dumb question.
I have a BCM50r2 and a ip phone 1120.
The 1120 displays only date and time. Anyone knows about how to shows the number of the DN itself?
Thanks a lot,
Heros
Hi all,
i have a 2050 softphone on a bcm50 r3.0
I need to know if it is possible to hear ringing of the phone on a device and audio on the headsets.
I mean i dont want to hear ringing on headsets because is annoying.
Is it possible to do that?
Thanks a lot,
Heros
I have the answer for all the guys:
-Set up alternate routing in dialplan
-Put the first pool of lines as first alternate route
-Put the second pool of lines as second alternate route
-go to schedules and Set the system in Day mode
-Set Day from 00 to 12:59 every days
-set a...
Hi all,
i have BCM50 rls 3.0 with BRI expansion
2 BRI are on DID 021345678
2 BRI are on DID 021456888
Sales departement wants to use 0 as prefix to call
and wants the customer see 021345678 as the CLI
Tecnical department wants to use 0 as prefix to call
and wants the customer see 021456888...
I got sip trunk working only for outbound calls.
Problem is that I cant make BCM send a REGISTER ot the provider there is no way to get inbound calls as you cant register!!!
I'm not using contivity client. Connection to/from BCM works
because each phone can see the BCM.
I call a TDM line without problems
As i suspected if media path is always between IP phones
that's the problem.
no NAT is allowed between IP phones
Thank you,
Heros
I have a BCM50 Rls 3.0
I'm tryng to set up a trunk SIP.
I put the BCM50 behind NAT 1:1
BCM50 192.168.3.5 <--NAToneTOone--> 213.215.x.x <----> IP_ _SIP_Provider
I can get signalling working but when I hang on the phone
I dont have audio.
The problem seems to be that BCM put his private IP...
Hi all,
I have some 1120E IP and 1140E IP phones on a BCM50 release 3.0
Randomly the KIM reboot and lose programming.
All 10 telephones are set as CAP on the system
I already installed this patch for the BCM50
BCM050.R300.SU.SYSTEM-53_BCM50_3.0 (smart upgrade)
And the last firmware for...
Hi all
I have a BCM50 R2 with some softphones 2050
the 300 softphone is on 192.168.1.X subnet
the 301 softphone is on 192.168.0.X subnet
the BCM50 is on 192.168.3.X subnet
each softphone can see BCM50 via the gateway
when 300 calls 301, 301 hear ringing
when 301 answer, no audio can be heard...
Already tried.
deregistered softphones from element manager and re-registered. The first softphone asks for the DN, the second
automatically gets the first telephone DN.
I have a weird behaviour on two softphones 2050 on a BCM50.
I registered several softphone on this bcm50 , 5-6 and it's all right.
I have two computers. When i install the 2050 on those computer, i get the same DN on both!!!
I tried to reinstall softphone on both computer but didnt work
I...
Yes. The system ID on BCM50 is the MAC address of the internal LAN. You can read it on the underside of the BCM
or in system--> keycodes-->systemid field
In this case i opened a case with Nortel, probably is a problem on that BCM itself
I tried to install on Windows Vista calldesktopmessaging
to get fax to mail mail to fax service.
During process the print fax installation fail and
I get this error in c:\winstfax.log:
"This printer driver installation utility will not work on the operating system you are currently running"...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.