Search results for query: *

I have a customer on a PRI 23 channels. All 4 reception phones have 6 SWCA keys programmed as call 1 thru Call 6. One of the call buttons gets stuck and lit up. Comes up as "call 2 in use" The only way to get rid of it is to reboot the system. Anyone happen to have seen this before? Thanks km2601

Thanks curlycord, I find it strange that a normal digital set can call the target phone and the call gets sent out and answered by a cell and carry on a normal conversation. But when the door phone calls the target the call gets disconnected as soon as it is answered. It is on a PRI so I am...

I have a BCM 450 6.0 with latest SU-15 running 4 door phones. The door phones target a digital set on a security desk which works fine. The digital set uses find-me-follow me to a cell phone set to "Always" This also works good! Problem is that when a door phone is activated the find me follow...

I installed a new DMC 320 with a couple of repeater 49 units. I have downloaded the latest version of the service tool from a brand new BCM 450 6.0 with the latest SU. My issue is that the service tool does not list "Repeater 49" only goes up to 45. Anyone run into this?

I have a BCM 450 1.0 and the 3 DSM 32+ modules have red LED's. Have not seen this before, I do have one port not working but no alarms reported. Anyone seen this?

I have a BCM 50 6.0 with a PRI. Sets are programmed to use company name 1 and 2, and also have the PUB-OLI programmed. The only way I can get the name to send is if I check the "send name display" box in telephony resources. Does anyone know if there is a patch for this?

Will do,, Thanks for all your help

It was a windows 7 machine and they re-installed XP but yes, I believe it does have windows updates on it.

I have a BCM 50, 2.0 running RCC latest version off the Nortel site. Installed on a new XP machine, when it reaches the last stage on the verification tool during installation it always fails. We have ran thru the troubleshooting steps as listed and everything seems fine but it will not pull the...

They are T series release 1

I have a MICS 7.1 NA with loop start trunks single cabinet. using mostly T7208 sets, system is programmed for "use set volume" The volume is excellent when it is set to "system volume" but will not go as high when we set it to "set volume.

I have a customer who started with a 400 running 3.7 and now upgraded to 4.0. They have a P.C on their network connected to yaho music for which they purchased a license. The customer set it up and it works great.

Almost sounds like you could have a programmed dss button stuck and it voice calls that ext. as soon as feat.66 is activated.

I can not get the "NEW CALL" feature (807) to work with the polycom soundstation2 digital conference unit. The feature works well with all my other digital sets. 7100,7208's etc. It does not accept Feat*807 or feat.807 when attempting the 3rd outside party. Anyone run across this yet?

Sure, it is programmed as AUX Ringer in set programming capabilities for that particular set and terminates on the front of the BCM 400 or 50. I believe it is labelled AUXR

We run into this all the time and find that release 14 and higher will work fine with both the BCM 50 and 400,4.0

Has anyone tried using the 2050 mobile client on a blackberry curve 8310 with windows mobile?

Blackberrys do have windows mobile available. it seems to be a rule limitation with microsoft, but i am sur there must be a work-around for it.

Has anyone had success with desktop messaging using outlook exchange and getting those voicemail messages sent to blackberry users with windows mobile??