I am connecting 2 Cisco switches that are 80 feet apart. I already have a straight cable between the switches so I need a cross-over between the switches. I want to connect a short cross-over cable to the switch and connect to a RJ45 coupler, plug the 80 foot cable into the coupler and plug the...
I get an error AUTH006 after typing in the CUST number:
REQ new
TYPE aut
CUST 0
AUTH006
AUTH0006
Authcode database does not exist for specified customer.
Severity: Info
This client already have two access codes to restrict LD calls and is requesting another code. All users dials a LD number then hears a beep, they then enter a 3 digit code to complete the call. I want to add another code.
How is this done? Thanks
Can anyone verify the colours for the RJ45 pinouts from the DB15 conector?
Is this cirrect for the RJ45 side:
1 is blue
2 is orange
4 is red
5 is green
It was 2525. I got an error message when sending a test email from the PC. I changed it to 25 and the test email from the pc worked. However, when I try to scan directly from the printer with 25 it fails.
I cannot email from a printer anymore since changing internet provider. I changed the smtp server on the printer to match the new smtp server. Could it be that the new smtp server require authentication whereas the old internet provider did not require authentication? The printer does not have...
A customer have a HP LaserJet 2200 printer that was working with DHCP on a linksys router. The router was replaced with a different type of router that is connected to a Cisco switch. I can ping the printer but I cannot print to it. I reboot the printer. I also got a config print out and the...
I have 20 laptops to connect to a firewall. I am thinking of using a Linksys BEFSX41 EtherFast Cable/DSL Firewall Router w/ 4-port Switch/VPN Endpoint. Will this support 20 computers? There is no info on the amount of PC's that it will support or maybe it does not matter.
Yes, it is a DB15 T1 connector. The PBX will be replaced with a VoIP solution and so the T1 circuit will be used on non-pbx equipment.
When would I use option 1 or option 2 pin out?
How can I convert a DB9 connector to a RJ45 connection?
The Notel PBX has a DB9 connector for the T1, but the PBX will be removed and the same T1 circuit will be used with a RJ45 connector. I want to make up a cable with a DB9 end and the other end will have a RJ45 end. What should the pin out...
Thanks. I can now see the CallPilot login screen. It asks for the server name. Is there a default server name?
I might just have to go onsite since I do not know the server name.
I am connected using the modem but IE will not connect to the callpilot.
The URL used is 137.135.128.250
Is the IP address all that is required in the browser?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.