Search results for query: *

Thanks for all the input. Right up to the last minute I was pulled of to work another project on a hotel whos PBX crashed and burned and have to install a new one from the hip. I have made a copy of the text from Vince for the next time I have to do this? Thanks all.

Thanks for all the help. I noticed that there was no layer 3 routing in this switch so I did not worry about that. And since the data and voice would already be on separate subnets to begin with, I would use the vlan to setup QoS to help it along.

Little more specifics. I left the data on the default VLAN another company takes care of them. The VoIP system is Mitel and will be implemented later next month, I'm just trying to get a jump on the game to make a smooth cutover.

This is what I did on my test lab 2924xl version 12.0 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Switch ! enable password cisco ! ! ! ! ! ! ip subnet-zero ! ! ! interface FastEthernet0/1 switchport voice vlan 20...

I have a network with 1 2940 and 4 2950's. I will be implementing a VoIP pbx and using the switch port on the back of the phone. Am I to understand if I set the data ports to multi vlan 1 and 20 pc's on 1 and phones on 20 and both with different subnets or would I need further programming?

I did....and got it. And I also downloaded the installer guide again and saw all 4 **config passwords in there also. Thanks for the help, I was even able to program the lines to ring and set the apperances on the phones...not to shabby for an Avaya tech. :)

Is it possible for anyone to mail me the installer password for **config?

I am logging in with feature **config and the default password listed in the installer manual. Unless **config has a few different passwords that go along with it?

I'm trying to add 2 more LS lines to a CICS 6.1 when I enter config mode/Terminal & Sets, select the ext I would like to program the only. I do not get any option to add more lines the first option available is capabilities. Any help would be greatly appreciated and welcome. I'm primarily an...

Found out it was User Restrictions...we had it set up to use Phone Manager in there...but once removed and applied Phone Manager started working properly

No one else have any opinions on this?

Yes I can ping the IP 500 and Windows firewall is turned off.

I have a VPN tunnel built between 2 locations using a 3120 at the remote site and 3305 at the corp site. I can not get Phone Mgr pro to register...I can get 4610IP sets up and running though...The IP 500 is running 4.1.14. Thanks for any and all help.