Search results for query: *

oops! the weekend was not long enough, I meant DB-9, thanks John for correcting me.

I am trying to connect an additional TTY to my PBX but I need an NT8D95 cable. Unfortunately I do not have one, so if any of you have any idea how the NT8D95 cable is pined out. The NT8D95 is a male DB-15 to female DB-25. I have burn half a day messing around with different null adapters and...

Nope, already looked there. Nothing about on how to interpret the output, just input.

OUCH!

There was nothing explaining the output format. Any other suggestions?

I was having trouble finding the NTP. Here's why. 553-2001-450 Traffic Measurement formats and output Replaced by 553-3001-300

Thanks for the info Arch. I will try and find that NTP. The CCS and Erlang doesn't bother me. Gumpus

Hello, I have extracted trunk traffic data from my switch but I need to know how to interpret it. Thanks, Gumpus

You better contact your carrier.

Thanks for the quick reply!

Hello, I was asked what modem speeds to expect through our PBX. A modem call will dial in to a DID that reoutes through a T-1 then terminates on an analog station (500 set). Thanks in advance, Gumpus

FYI - there is an Octel forum.

If you have and ACD system like MAX or like you can be able to compile stats for an extension, you can also see what trunk was used to call the DN.

LD 60 LCNT? are the counters on the T-1's clear? I would suspect the Dialogic cards haveing a bad port. Is this for a VRU? Does the T-1 wind up with a analog channel bank? I would try changing dialogic card #1 with card #3 and see if the problem follows the card. gumpus

I would contact AT&T and try to get it resolved. Hopefuly you have a good sales rep at AT&T that acn weed through the B.S. to find out what numbers are ported to the T-1 in question. Good luck, gumpus

Hello, I have an option 61c with an Octel 250. The problem is when a caller (typicaly one of our sales people) dials our toll free that rides in on a PRI ask to be transfered to their voicemail and the last four of the phone nunmber the caller matches a mailbox on the system other than theis...

I sounds like an odity from AT&T (All Twisted & Tangled). Do you know what route the call is coming from? I can recal an issue of people calling a toll free number that was set up as a test number by MCI to test a new circuit. The number was pointed to my phone, since I did not use an IDC...

tcomanalyst, I would contact that carrier that that call is coming in on, because the format of numbers is how an unassighned DID appears at a switch board. Is 6995 a programed DN? gumpus

U/P 3043313 = memory available used: 905230 = memory used tot: 3948543 = installed system memory Disk space needed: 222 kbytes = amount of backup space needed (2.0MB format 3.5 floppy) TNS AVAIL: 72 = remaining unassighned TN licenses USED: 728 = amount of programed phones and...

I would try ging to LD 11 and you will get the count of available TN licences. >ld 11 MEM AVAIL: (U/P): 3043313 USED: 905230 TOT: 3948543 DISK SPACE NEEDED: 222 KBYTES 2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED) 4MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED) TNS AVAIL: 72 USED...