Search results for query: *

Installed 500v2 with combo card.(6)ds ports, (2) pots ports and (4) line ports. POTS ports are port 7 (ext16) and port 8 (ext 17). When dialing ext 16 or 17, hearing ringing audible across ports. When dialing in on lines assigned to ports, no ringing audible is heard. The lines are assigned to...

Installed PACS rel 8. Have what looks like an exclamation point on display following name and ext number. Any suggestions? Thanks in advance. PACS rel 8 with large PVM card

I replaced an older defective sat terminal with a 715gbcs-2 terminal and I need to adjust the horizontal to read be able to read the entire screen. The login only shows n: on the left side. I log in as 715 type terminal. I went to Control F1, display, and find nothing that allows me to adjust...

I do have a clue. Never had to research this before. I will try that next time I am out to site. I searched Avaya support site and came up with nothing.

I replaced a defective 715 sat and the replacement unit needs horizontal adjustment. I can only see n: where I should see login: There are no vertical or horizontal controls on the unit. How do I make those adjustments on the screen of the terminal. I am logging in as 513 type which is default...

Problem solved!! I want to thank everyone for their response. I am running Windows XP on my laptop. I purchased a Zoom 56K V.92/V90 Model 3095 USB Mini External Modem. I learned every time I change the modem connect speed (ie 4800,9600,etc) I would have to restart my computer before it would...

Thanks to everyone for your suggestions. The R6 has no admin port. Has contact closure and smdr. No carrier. Stand alone processor. I tried the sportster. Got better results with the Zoom 56K USB, but still will not establish session.

I tried several different speeds and the modem dialog box that appears always reads "connected at 14400bps". I am connecting to the modem, I never receive the password prompt. Unable to establish session with system appears after 30 seconds. I stay connected passed that but never receive...

I did.A dialog box never appears requesting a password.

Using PACS R8.0.0.4 admin software, I am trying to connect to the remote access PCMCIA card in the R6 processor by using direct dial (local). I am dialing ext 76 from my external modem at the PC. The PCMCIA modem answers, I received dialog box stating connected at 14400bps. The dialog box...

Can the D channel be changed from channel 24 to another channel? If so , how is this done? Thanks in advance.

Problem solved. Network services/special services/pattern 011/digits to delete. I deleted (3) digits and this solved the problem. Type of number remained (I).

PRI INFORMATION Slot 6 Switch: 5ESS System: By line BchnlGrp #: Slot: TestTelNum: NtwkServ: Incoming Routing: 1 6 CallbyCall By Dial Plan Channel ID: 16 15 14 13 12 11 10 9 8 7 6 5...

Recently, Germany changed cell phone numbers to 11 digits. When calling international from Legend 7.0 the customer can reach 10 digit numbers in Germany fine, but when dialing 11 digits, the network provider does not receive the last digit dialed from the Legend. I do not see any problems or...

Thanks Joe. You have been a great help.

I could not find anything there. There are so many different cards like 12A1,12A6 different comcodes, some will upgrade the switch but i do not know if it upgrades only once or everytime you use it. Need a chart!. Any other suggestions?

Can anyone help me find a compatibility chart for the pcmcia partner backup,restore, upgrade, remote access cards?

Thanks merlinman. Very good advice.

I do not know. The customer was wanting to know limitations so as to decide where to place temporary classroom buildings for country club (golf) training sites. They have lots of acreage.

Thank you rr95!