Search results for query: *

Thanks for all the responses. We are running CM 3.1.4. The suggestion to enter the ars fac in the feature-access-codes screen is a good one but unfortunately won't work in this case as we support sites in the US, UK, and continental Europe off our primary controller and the US and UK use 9 for...

Thanks Uzumaki. This LSP sits in a G700 which does have an M710 configured and a local T-1 connected. The route pattern set up for this location sends outbound traffic via this T-1. Problem is that on our primary S8700 that this connects back to, the ars fac for this location is correct (9...

Hi, I have a remote site with an s8300 set up as LSP. During failover testing I discovered that every night when the translation is saved from our primary site (or if a save translation LSP command is entered) the ars fac and attendant fac for the location of this LSP are wiped blank, meaning...

Thanks for the response, the above was not really an option however as the stack is already built and on the network and the site is now remote (left customer site last week). I was able to telnet into the stack and nvram init the MGP in question and this time it allowed me to build all my...

Bump...anyone out there seen this before?

Forgot to mention above that I have also tried clearing out the mgp's ip route entirely along with resetting things etc. but no luck. It will always allow me to put in only one entry after a clear/re-set.

Hi, I have run into a small problem with a 3 stack G700 installation I have just put in for a customer. For the 2nd and 3rd G700s in the stack I have been able to put in 3 static routes to be able register the MGPs back to three different CLANs should there be failures. On the master however I...