Search results for query: *

Hi, Can anyone help me to set up reminders on Avaya IP phones ? Is it possible ? I'm having 1608/1616 phone sets running on CM 5.1.2(G450/S8300) Cheers,

Hi All, Having a small issue at a customer site where the customer wants to have WPA2 802.1x authentication on his Aruba wireless access points..the Avaya wireless phones (3631) are working fine on WEP When I select WPA2 802.1x authentication its asking for a certificate to be installed. I...

I will try the options and let you know the results.. Thankyou,Mitch

Its G350/S8300 with MM711 cards.

G3 Version: V15,Platform: 13 and running on CM 5.1. I have configured CO trunk for incoming/outgoing calls. Any setting on the trunk group that I might have missed ?

Hi All, I have an issue at a customer site where the CLI is not getting displayed on PSTN trunks. It displays the trunk name and the TAC. The site has a G350/S8300 and IP Phones.Is there any parameter that needs to be set for enabling CLI on PSTN trunks ?? Please advise.. Cheers

Hi All, I'm trying to get a S8510 LSP server register to main server, which is again an S8510 server. The setup at the customer site is a G450 Media gateway with the S8510 Main/LSP server. Has anyone tried this configuration ? Please help me out. Cheers

Hi, I too have the same problem with 5.5J i have seen a patch for a similar bug in 4.5. Have you found any solution yet? Regards

Hi, Do I need to restart my G350 gateway (with S8300 server) after installing the SIP server license using weblm tool ? Please advice. Rgds

There is an G350 gateway running on CM 5.0. The customer wants the Cisco ATA's to register to the gateway for fax. I have requested for SIP enabled server license. Will the ATA's work if I configure the G350 as SIP server and ATA's as sip extensions ?

Hi All, I need to get a Cisco ATA (Model-ATA186)to register to an Avaya gateway.The customer wants to use the ATA's for Fax. Can anyone please help me out with this ?? Cheers

I'm trying to restrict the Auth codes configured in the system to be dialed only from a particular extension. For ex auth code 85xxx should be dialled only from extn 2522. Has anyone implemented this ?? Please advise.

Thank you. I will surely give it a try.

I need to know whether I can register Nortel IP phone to a Avaya media gateway.If so, what needs to be done ? Looking forward for suggestions.

Hello, Does anybody know how to restore the software on the WSS2350 switch. I pressed the reset button on it as i wanted to reconfigure it and now it keep rebooting with the below message, "supervisor: 6.103425 ERROR: process_sigchld: process fp exited pid=802833 status=0x100 (1/0)"...

Hi, Has anybody managed to get CALL PICKUP (RNPG) working on phones with hot desking? Regards, Sanketh

Thanks Wallae, it was an IPSec issue. Its working now!!! Rgds,

Hello, Has anybody come across a problem where the ELAN doesnt come up. I have rebooted the CP server, the ELAN come up but goes down again in 10sec. I have checked the ELAN NIC card setting and they are fine. The Software on the CP server is Rls 4.04 Rgds, Sam

Hi Guys, I Would like to know if some body can help me with the SIT tones issue that i am facing at my site. I Have a concerto system and i am facing lot of issue when placing calls to the UK. Can you please guide me on the options that i need to check for this problem. Regards, Sanketh

This is how i want... when there is a emergency sitiuation or evacuation the attendant should press a key which will forward the calls to VM or announcement which will have a emergency greeting. Does this help?? Rgds, Sank