Hi,
I have a cluster (one publisher and one subscriber version 6.0.1.1000-37),I simulated a failover of the publisher by disconnecting the network cable. After 3 minutes all the current calls were lost, is it normal?
Thanks in advance,
Hi all,
I have a CCM version 4.1.3 and i want to know if I have a telephone that is configured with a forwall all to another number.
If this telephone becomes unregistered for a reason (power failure or other) does the forward still active or not?
Thanks
Hi,
Is it possible to put the MoH file on the Cisco router 2801?
I don't want to put on the CCM, I have a centralized architecture and 40 distant sites
Thanks in advance
Thank you for your answers i will redo the test monday
I am using a 4.1.3 and the busy trigger is set to one
because the users want to receive only one call.
Maybe with the busy trigger set to one call hunt with call pickup don't work??
I have one telephone Cisco 7960 and 7 phones 7940 (busy trigger set to 1)
All the telephones are in a same group pickup.
And there is a hunting group(broadcast) configured for the 7960 that rings on all the telephones
My problem is when there is a hunting and if one 7940 is active, and after a...
Hi,
I have problems on sending and receiving faxes on my FXS ports, sometimes i receive blank papers sometimes i must send twice... Is there any bug?
I'm using a CCM v 4.1.3 and the gateway are 2801 IOS 124-11 T1
no aaa new-model
network-clock-participate wic 1
network-clock-select 1...
Hi,
I have a gateway 2801 with FXS cards, when there is an electricity cut and it comes back i see the FXS card not registered in the callmanager.
I must do a reset on the gateway in order to see it registered
Is it normal? The registration isn't done automatically?
Thanks
Hi,
I have one distant site where there is a Cisco 2801 router one BRI card and one FXS, i have a fax connected to the FXS and a RNIS connected to the BRI card.
When there is an electricity cut and it comes back i see the BRI card not registered in the callmanager.
I must do a reset on the...
Hi
I have one Call manager and 30 distant sites.
Can i configure the music on hold of the phones in the distants sites on the 2801 router instead of the callmanager.
Thanks
Hi,
I have a problem in my gateway, my BRI card isn't registered in the CCM. I don't know why
I made a debug,there are some errors but i don't know what does it mean can you help me
*May 21 16:01:16.415: ISDN BR0/1/0 Q931: Ux_DLRelInd: DL_REL_IND received from L
2
*May 21 16:01:16.419: ISDN...
It didn't work!!
Here is the configuration of the gateway
Current configuration : 7520 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname GW102
!
boot-start-marker
boot-end-marker
!
logging buffered 51200...
I have one with IOS version 2.43f and another with 2.411
Below some of the config of the gateway
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
isdn send-alerting
!
interface BRI0/1/1...
Hi,
I have one CCM 4.1.3 and gateways 2801 in other sites with FXS cards for the fax.
Sometimes i have problems with the fax and i have the FXS card not registered in the CCM.
I make no mgcp and mgcp on trhe gateway in order to fix that.
Do you know why i have this recurrent problem?
Thanks
My dial plan is consisting of seven digits.
The phone that i want to reach is 1002828
In SRST i receive from the telco 5890
So what i done is a translation rule but it doesn't work!!
voice translation-rule 1
rule 1 /^\(5890$\)/ /1002828/
call-manager-fallback
max-conferences 8 gain -6...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.