Search results for query: *

my old Dell laptop kept on locking up and randomly shutting down and sometimes not booting so I removed the top plastic cover strip(the one with the LATITUDE logo on it) removed the keyboard, and pressed down hard on the processor chip in the far right hand corner.Its now all working ok so I...

this annoying message could indicate a possible problem in the hardware but should not affect the working of the switch try defaulting the switch/clear the logs etc(save your configs first) otherwise,it will need looking at by a technican

try this at the admin prompt clear log diag-status clear log messages nvram unconfigure switch all reboot the switch next run diag ext slot backplane see what happens when the diags complete

do show log and show diag then you can see what has failed

I have a new jeantech 350 w psu which runs ok with pins 14 and 15 shorted but only powers up from the front button about once in every 10 times. (I was attempting to upgrade the psu.) I'm puzzled-maybe it's a cpu good signal problem or faulty new unit ?.Motherboard is Abit AN-8.

Hello Folks I have an e systems celeron 380 1.6Ghz laptop with 512Kb memory(256 on board and 256 sodimm) Is there any advantage in upgrading the memory to 1Gb?. It is used mostly for internet,playing DVDs,running Office programs etc,not games. I admit its a cheap laptop and runs ok but anyone...

There is probably a failing component in the Switch. You could try and reload the software image but the switch may have to be sent away for repair.