Search results for query: *

I'm going to try that now. On another note, I'm currently using an ATT managed router but i'm replacing it with the 1721 i'm trying to configure now. Does ATT need to approve my replacment router's MAC with their service or should I be able to connect regardless?

Any help would be most appreciated. I've been working on this for four days strait and you folks are my last hope. What the heck an I doing wrong?

Im using the DSL line for all Internet users (101) and the T1 for games (100). I don't want Internet users to use the T1 and cause gaming lag in my LAN center. I'm using this config on my other router and it works great. All I know it that my T1 has no online access. However, the DSL line...

Bump...sorry i really need help on this ;)

I have a 1721 router and that I attempted to configure it for our T1 and DSL line using PBR. I copied a config from my other 1721 that i use in a different local which works fine. Both of the routers are supposed to be configured in the same manner but this 1721 has an older IOS of 12.2(4). Can...

The configuration register was not 0x2142 after running a sh ver. I changed it back to 0x2142 by running the following command: router(config)# config-register 0x2102 I then typed "wr mem" and reload. Everything is fine now and all is well. Thank you.

I'm having the exact same problem on my 1721. After reseting the router it boots to the rommon prompt and attempting to have me start the inital configuration. If I hit Ctrl+C I get the router> prompt and I can even type sh conf and see my settings. But the router will not boot the config that...

Is no one familiar with Policy based routing?

I got passed the error I posted above by entering the following commands but I have no Internet access now: ------------------------------------------ interface fa0 no ip nat inside exit exit clear ip nat tran * conf term ip nat inside source list 1 pool DSL overload interface fa0 ip nat inside...

I’m trying to separate the traffic that gamers and Internet users use to help improve the performance of my T1. I've configured my router to redirect all web based traffic through my Ethernet WIC to help alleviate the stress on my T1 line. The Ethernet WIC is connected to my bridged Verizon DSL...

Ok, I lost Internet access after that last changes so I compared the commands and managed to get the router to work with the following commands; ip nat pool NAT 12.158.72.31 12.158.72.36 netmask 255.255.255.192 ip nat inside source list 1 pool NAT overload If this is wrong then please let me...

I've made the following changes however the following command could only be entered if the last octet was changed to 192. Here is what happened when I typed the command: _________________________________________________________ nj-rtr(config)#ip nat pool NAT 12.158.72.31 12.158.72.36 netmask...

Thanks for the help on this folks but the advice you're giving me seems to only address security on the router. Should these changes also prevent customers from being denied online access from the router as the original post mentioned?

I entered all the commands you posted and this is what I got in return; nj(config)#hostname nj-rtr nj-rtr(config)#crypto key gen rsa ^ % Invalid input detected at '^' marker. nj-rtr(config)#$ NAT 12.158.72.31 12.158.72.36 netmask 255.255.255.248 %Pool NAT mask 255.255.255.248...

Which of these commands should I still enter? line vty 0 4 trans in ssh hostname bla crypto key gen rsa ip nat pool NAT 12.158.72.31 12.158.72.36 netmask 255.255.255.248 ip nat inside source pool NAT int s0 overload no ip nat inside source list 1 pool 2T1S overload no ip nat pool 2T1S...

I entered the first command (line vty 0 4)with no problem however, the second command (trans in ssh telnet)does seem to work and gives me the following error: NetJam(config-line)#trans in ssh telnet ^ % Invalid input detected at '^' marker. When I type in "trans in...

Thanks for the tips guys. I have limited experience with routers and im not sure how to change the password or what commands i use to make the changes you mentioned Burt. I attempted to change the password and believe I was successful but I don't know if I left any holes im my security. I know...

Thanks Viper, Everything seems to be running ok for now.. I still haven't Ghosted anything yet.

I'm running into a problem where random PCs cannot play games online at my Cybercafe. Users can intially play online at times but may get kicked from an online game or simply choose another game when the problem starts. When I find one of my PCs having this problem I check to see if I can ping...

Hey Viper, I went ahead and cleared the config and attempted to reset the switch name and IP. Now when I type a "sh conf" the list that displays is much less detailed than before. Can you please have a look at this conf and tell me if we're good. So far everything seems to be ok but I haven't...