Search results for query: *

Hardware install manual on line. Looking if anyone has the setup configure doc. There was one and I had it but scanned 7 old hard drives to no avail. Thanks

2 terminals and this is random on both. Quit boots you out of ops and must restart e7. If entering a new order that order is lost. Network issue? Cf card? Strange on both terminals. Been running 3 years no issue.

Auto sequence set to check for open checks then print their report. Issue has started that "open check found on bar" There are no open checks in the system. Any experience with this? Can manually goes into reports and print read. Thanks

Terminal loaded updating the loading ce.... as normal thwen a flash and reboot? Experience with this?

Site upgrading to Res 5.7 and after going through all the hoops from Oracle as to Serial # since they are larger udocs they now say we need 512MB Compact Flash. Units currently have 128 cards. New 512 formatted to FAT on Pc. Place in ws4lx and terminal loads to Micros Blue Boot Screen and sits...

I had a similar issue that a couple printers would not print reports but receipts fine. My fix was I found someone playing in workstation printer settings had changed the assigned printer under to workstation reports to blank. So report executed but went nowhere.

So upgrading a 4.7 dB to port onto a 5.7 machine. Question if the 5.4.licence patch is applied can you now add a addional terminal? Site is upgrading to add 3rd party integrations but also has a winterize patio for the Covid winter and would like a portable terminal as they have a spare backup...

Lets try this again. These two kds started popping up with ip conflict error and takes them off line. In the kds network setting assign any address and save you get ip conflict error. Set kds network to auto to see what ip it would assign. Ipcomfig listed 192.168.2.120 Manually entered that...

Pinging one way...frustrating sauga continues. On kds no matter the ip entered we get Conflict error. OK let it obtain an ip and see what comes up. 192.168.2.120 Set kds to that and it takes it. From server can ping.2.120 with reply. Ok From kds cannot ping server 192.168.100.100?? Running...

Kds 166 res 5.7 Kds can't.see server won't cal. Test line from kds jack to office switch it's fine. If I change the ip to anything else I get ip conflict. That's what started this venture ip conficts on 3 kds units. Floor terminals ok.

So interesting update. in congif in workstations and office ver4.0 had the option for the new keyless code option for licensing as seen in pic BUT it will still work with the usb license keys. Ver4.1 had this box to aggrege to license terms. No option to even enter a code and does not work usb...

ok have a db that was programmed on a ver4.1 now if we try to use this to update a site with ws5A and ver4.0 it comes up with incompatible error on bootup. So can the 4.1 db files be extracted from 4.1 and imported into 4.o or are we doing separate programming. i know you can go from older...

FIXED.... Ip conflict. Changed ip in micros. Made sure mdshost file updated. Recal to new ip and all good.

KDS down. rebooted cotroller loads to white screen. Shows connected. Can ping from office server. Re-Cal Also stop start services Still the same. Thoughts?? Thanks

Res3700 Terminal screen Check detail. Few years ago after you serviced the check and reopened the table the last line was a time serviced line that we could spot check how long the order had ben placed. Cant remember the name of the function or to find the settings to active. Thanks Similar to...

So from what i understand you want on tender (payment) to print the entire bill showing the tender and payment? Not having a sysyem in front of me if you go into your config tenders select a tender and right side with options is "print check" select it and on tender it will reprint the entire...

Hello Matt. Please can you add me to the dropbox link. My email: gneal63@gmail.com I need RES 5.4 5.5 5.6 5.7 Old customer with multiple sites and versions. Much appreciated.

Helped myself. Found buried on Oracle site.

I think this was part of the 3.0 rmf doc when released and it seems I deleted it cleaning up unwanted files. Now I want to use to track some prime products. Anyone can help? Thanks

yes. that was it. figured it out with enough messing around earlier. Thanks for the reply.